Microphone Audio) - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE
MIC-1 , MIC-2 (MICROPHONE AUDIO )
Two 3.5mm phone jacks on the front of the brain support two independent channels of balanced or
unbalanced microphone level analog audio inputs.
B
C
PIN SIGNAL
A (TIP) IN +
B (RING) IN -
C (SLEEVE) GND
Microphone Level analog audio input signals are routed via a high quality pre-amplifier and soft limiter,
whose Gain may be controlled using the Input Level control to achieve the desired audio reference /
recording level. Microphone inputs support +48V @ 10mA Phantom Power as a user selectable option. If
To assist with reference level setup, the camera provides a color-coded Peak Level Meter in the Graphical
User Interface, with witness marks that indicate 0dBu (-20dbFS) and 0Vu (- 16dBFS) levels.
Peak Level Meter range is –36dBu to +20dBu (-54dBFS to 0dBFS) and provides input clip indication.
NOTE: A pre-fabricated XLR to TRS interface cable, Part Number 790-0229, is available from RED Digital
Cinema.
COPYRIGHT © 2013 RED.COM, INC
Microphone Input Connector
A
DESCRIPTION
Mic Input (+48V Phantom Power)
Mic Input (+48V Phantom Power)
Camera ground
DIRECTION
In
In
--
955-0002_v4.0, REV-C | 177