Appendix E: Audio Subsystem Information; Audio Format; Channel Setup; Source Selection - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE

APPENDIX E: AUDIO SUBSYSTEM INFORMATION

AUDIO FORMAT

The audio format is always either 2 or 4 channels of 24-bit audio data recorded at 48kHz. The audio data is
embedded in the R3D file and can be exported from REDCINE-X into separate audio files.

CHANNEL SETUP

The audio channels are set up under SETTINGS > AUDIO > AUDIO CHANNELS. Separate tabs exist to set up
the channel 1/2 and channel 3/4 properties.

SOURCE SELECTION

Audio is always recorded at channel pairs. Each of the two channel pairs can be assigned to one of the
following sources:
None

Camera Analog Microphone Input (Cam Analog)

Pro I/O Analog Microphone/Line In Input (Pro I/O Analog)

Pro I/O AES A or AES B Digital Input (Pro I/O AES A)

NOTE: AES A can only be assigned to channel 1/2, and AES B can only be assigned to channel 3/4.
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, REV-C | 189