Bomb Evf; Red Touch Lcd - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE
BO MB EVF
The BOMB EVFs are high-definition, lightweight viewfinders that align quality performance with compact
form factor.
For applications where use of an attached RED EVF or RED LCD is not desired – for example when working
on a crane – the VIEWFINDER / MENU output can be transferred to the HD-SDI or HDMI outputs, supporting
remote camera monitoring up to 200 ft away.
RED T OUCH LCD
The RED TOUCH LCD pixel progressive scan color displays allow you to view your image and navigate
through menu settings using touchscreen functionality.
For applications where use of an attached RED EVF or RED LCD is not desired – for example when working
on a crane – the VIEWFINDER / MENU output can be transferred to the HD-SDI or HDMI outputs, supporting
remote camera monitoring up to 200 ft away.
NOTE: Do NOT use the RED LCD as a handle to lift or carry the DSMC. Damage to the RED LCD or other
components of the DSMC system caused by using the RED LCD as a handle is not covered under warranty.
NOTE: The RED LCD swivel axis has a total range of adjustment of approximately 360˚ (180˚ clockwise or
counterclockwise from the nominal "rear-facing" display orientation). The range of adjustment for the tilt axis
is approximately 180˚. At the end of the adjustment range are internal "hard stops" for both axes. Once the
swivel or tilt hard stops have been reached, IMMEDIATELY STOP APPLYING FORCE TO THE LCD.
Continuing to apply force after reaching the internal stops may damage the friction hinge. Damage to the
RED LCD or other components of the DSMC system caused by using excessive force to rotate the RED LCD
is not covered under warranty.
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, REV-C | 17