Data Path; Hd-Sdi/Hdmi Embedded Audio - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE

DATA PATH

The following diagram outlines the data flow in Preview. The only difference in playback is that the data
comes from the R3D file and the input channel selection is disabled.

HD-SDI/HDMI EMBEDDED AUDIO

HDMI/HD-SDI audio output is limited to the first two channels and the channels will be the same between
HDMI and HD-SDI.
A UDIO CON TRO L
Audio channel level inputs are displayed in the lower section of the screen. When audio is enabled, the circle
next to CH1, CH2 etc... will be Green and the box around the signal will be highlighted.
When setting the levels for Camera, Rear, and Monitor Mix, the VU meter will show the output levels for
these ports. The display can be permanently switched to display the audio levels for the output, which is
helpful in external recording mode. To toggle the VU Meter Source between input and output, go to
SETTINGS > DISPLAY > MODES.
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, REV-C | 193