RED EPIC OPERATION GUIDE
PEAK METER
The peak meters always show the incoming audio signal, no matter if the channel is recorded or not, as long
as a source is selected.
Actively recorded channels are drawn with a lighter outline and the channel indicator left of the peak meter
will be green.
The peak meters are updated 12 times per second with the maximum signal from the last 1/12 of a second
period. In case the input signal exceeds 19dBu the whole bar will be filled with red.
The total range of the peak meter is -36 dB to 20dB. (Values below 0 dB are shown with half resolution) For
reference the following markers are supplied on the peak meter: Solid marker at 0 dB, Dashed marker at
4,10,14,18 dB.
COPYRIGHT © 2013 RED.COM, INC
Channel 1/2 Enabled for Recording
Channel 1 Around 5dB
Channel 2 Clipping
955-0002_v4.0, REV-C
|
192