Installation / Removal - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE
N AVIG A TION GROU P
C
B
Scroll Wheel Selects and adjusts camera parameter value
Direction Keys Navigates camera menus and may select parameter for adjustment
Enter Button Confirms selected parameter value adjustment

INSTALLATION / REMOVAL

WARNING: The Side Handle is NOT hot swappable - meaning you cannot remove or install while the camera
is powered on. Before installing or removing the Side HANDLE, you MUST power down the camera. Failure
to do so may result in damage to the Side Handle and / or camera brain that is not covered by warranty.
To install the side handle:
1. Power down the camera if necessary.
2. Remove the brain side plate (if installed) by removing the single screw located at the bottom.
3. Rotate upwards to disengage lip at top of side plate from camera brain.
COPYRIGHT © 2013 RED.COM, INC
Remove Screw and Rotate Side Plate Upwards to Remove
A
Side Handle Navigation Group
A. Scroll Wheel
B. Direction Keys
C. Enter Button
955-0002_v4.0, REV-C | 28