Varispeed - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE
MAIN MENU
Available options under the MAIN MENU are FRAMERATE (FPS), ISO (SENSITIVITY), F STOP, 1/SEC
(EXPOSURE), WHITE BALANCE, RESOLUTION, and QUALITY (REDCODE).
FPS
FPS is used to select an image capture frame rate that differs from the Project's TIME BASE frame rate.
The default is 24 fps (or the selected Project TIME BASE frame rate if not 23.98 or 24.00 fps).
Ranges are as follows:
NOTE: All frame rates in the table below are based on a 23.98 TIME BASE at 8:1 compression.
FRAME RATE (FPS)
FORMAT
MIN
1
5K
1
5K HD
5K 2:1 1
1
5K WS
5K ANA 1
1
4K
4K HD 1
4K WS 1

VARISPEED

When a frame rate other than the current TIME BASE has been selected, the FPS text will turn Yellow and
VARISPEED will be shown where the Audio Meter is normally displayed at the lower right of the display.
NOTE: Audio is not recorded in VARISPEED mode.
COPYRIGHT © 2013 RED.COM, INC
FORMAT
MAX
96
3K
96 3K HD
100 3K WS
120 2K
96 2K HD
120 2K WS
120 1K HD
152 1K WS
FRAME RATE (FPS)
MIN MAX
1 159
1 159
1 200
1 239
1 239
1 301
1 356
1 399
955-0002_v4.0, REV-C | 71