Microphone Audio) - Red Epic Epic-X Operation Manual

MIC-1, MIC-2 (MICROPHONE AUDIO)
Two 3.5mm phone jacks on the front of the brain support two independent channels of balanced or
unbalanced analog microphone level audio inputs.
PIN
A (TIP)
B (RING)
C (SLEEVE)
Microphone Level analog audio input signals are routed via a high quality A/D and pre-amplifier, whose
Gain may be controlled using the Input Level control to achieve the desired audio reference / recording
level. Each microphone input supports +48V @ 10mA Phantom Power as a user selectable option.
To assist with reference level setup, the camera provides a color-coded Peak Level Meter in the
Graphical User Interface, with a solid vertical witness mark that indicates 0dBu / 0.775 v RMS /-20dbFS.
Peak Level Meter range is –36dBu to +20dBu (-54dBFS to 0dBFS) and provides input clip indication.
Version 2.0.5R1
DECEMBER 20, 2011
C
Figure 19: Microphone Input Connector
SIGNAL DESCRIPTION
IN + Mic Input (+48V Phantom Power)
IN - Mic Input (+48V Phantom Power)
GND Camera ground
©2011 RED.COM INC.
A
B
DIRECTION
In
In
--
155