Red Brick - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE
R E M O V E
1. Press the battery door release button (A).
2. Open battery door (B).
3. Press upwards on retainer (C) to release battery.
4. Remove battery from side handle.
QUAD BATTERY MODULE
Attach a Quad Battery Module and insert one or more REDVOLT batteries.
IN S TA LL
Insert battery into desired location and press until a click is heard and battery is seated.
RE MOV E
A
1. Press the battery eject button (A) for desired battery.
2. When battery pops out, remove battery from battery module (B).

RED BRICK

Attach to the camera using a V-Plate and 2B-to-1B Power Adapter Cable P/N 790-0138 to the DC IN
connector.
DC PO WER
Connect a DC power source to the camera in one of the following ways:
Plug the RED AC Power Adapter into AC power, and the LEMO connector to the DC IN connector.

COPYRIGHT © 2013 RED.COM, INC
B
Remove
Battery
955-0002_v4.0, REV-C | 62