Perform A Black Shading Calibration; Adjust Project Settings - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE
When FORMAT is selected, a FORMAT dialog box will appear allowing you to add Camera Identity and 3D
Position properties when formatting. When desired options are set, select FORMAT.
NOTE: If any clips will be erased on the attached media, you will be informed of the number.

PERFORM A BLACK SHADING CALIBRATION

Refer to CALIBRATION for complete details for performing a Black Shading Calibration.

ADJUST PROJECT SETTINGS

TI ME BA SE
The project TIME BASE defines the rate at which the footage will be played back. When changing the
project frame-rate, the sensor frame-rate will default to the project rate, but may be over-ridden using the
sensor frame-rate controls.
Multiple projects with differing time bases may be stored on a media cartridge (SSD).
To adjust the project TIME BASE, press the MENU button on the Side Handle or REDMOTE. Then use the
Scroll Wheel or Direction Keys to navigate to SETTINGS > PROJECT > TIME BASE and press ENTER. Adjust
to the desired value using the Scroll Wheel and press ENTER once more to confirm.
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, REV-C | 64