Touchscreen Lcd - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE
TO UCHSCREEN LCD
RED offers two touchscreen LCDs, a five-inch model with 800 X 400 resolution and a nine-inch with 1280 X
784. Both feature 4:4:4 progressive scan. You can navigate the DSMC menus and adjust camera paramters
by directly touching icons on the touchscreen LCD screen. Gestures supported include:
Tap: Tap on an icon to bring up a quick adjustment display.

Double-Tap: If the monitor is in Clean mode, changes to Menus mode.

Hold: Touch and hold on an icon to bring up an advanced interface display.

Slide: When a menu or drop-down menu is open, touch and slide to increment a value.

Pinch: Touch with two fingers, then open or close to magnify or normalize the video image. By default,

this gesture is disabled.
A
B
C
NOTE: Default functions shown. All keys may be programmed by the user.
CAUTION: When do not use the threaded holes when mounting the display to a RED camera brain. Doing so
may damage the camera or the display.
NOTE: Do NOT use the RED LCD as a handle to lift or carry the DSMC. Damage to the RED LCD or other
components of the DSMC system caused by using the RED LCD as a handle are not covered under warranty.
COPYRIGHT © 2013 RED.COM, INC
Touchscreen LCD – 5" LCD Shown
A. User Key 1 1:1 Magnify
B. Backlight Adjust
C. User Key 2 Exposure Check
Do Not Use Threaded Holes to
Mount LCD to the Camera
955-0002_v4.0, REV-C | 39