First Time Use - Setting Up Your Red; Battery; Attach Power Source - Red Epic EPIC-M Operation Manual
Digital still and motion camera
Hide thumbs
Also See for EPIC-M:
- Operation manual (216 pages) ,
- Operation manual (236 pages) ,
- Operation manual (253 pages)
Table of Contents
Advertisement
RED EPIC OPERATION GUIDE
FIRST TIME USE – SETTING UP YOUR RED EPIC
ATTACH POWER SOURCE
If a REDVOLT battery is installed in the Side Handle and DC power is connect through the DC IN connector,
the DC IN power supply has priority and will power the camera instead of the battery.
BATTERY
Connect a RED battery to the camera in one of the following ways:
SI DE H AND LE
Attach a Side Handle and insert a REDVOLT battery.
I N S T A L L
C
B
1. Press the battery door release button (A).
2. Open battery door (B).
3. Press upwards on retainer (C).
4. Insert a REDVOLT battery until it is fully seated and retainer (C) clicks into place.
5. Close battery door.
COPYRIGHT © 2013 RED.COM, INC
A
Press Battery Door Release Button (A)
Open Battery Door (B)
Press Upwards on Retainer (C)
Insert a REDVOLT Battery Until it is Fully Seated
and Retainer (C) Clicks into Place
955-0002_v4.0, REV-C
|
61
Advertisement
Table of Contents
