Enhanced A/F - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE
5. Press the ENTER button.
6. To exit, Press the MENU button.
Resizing
The spot focus square can be resized using the Navigational Wheel or the Touchscreen.
Touchscreen
Each double-tap the Spot window will step through the three possible window sizes. After reaching the
largest size, the sequence will restart with the window at the smallest size.
Side Handle / REDMOTE
After following Steps 1-3 in the instructions for Spot window repositioning (see above), simply rotate the
Scroll Wheel to cycle through the three possible window sizes. Press MENU to exit.

ENHANCED A/F

Enhanced A/F has an auto-focus algorithm that offers better performance and improved visual indicators
when in Confirm mode. After you select the ENHANCED A/F checkbox, all monitors that are currently set to
Overlay or Menus mode will be dedicated to only using the Enhanced A/F feature. Each monitor using
Enhanced A/F will be in Clean mode (no overlay) with a set resolution of 720p and update frequency of 60
Hz. (You cannot select a frequency other than 60 Hz at this time.) You will no longer have control over these
monitors until you disable the Enhanced A/F feature.
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, REV-C | 91