Appendix A: Upgrading Camera Firmware; Upgrade Procedure - Red Epic EPIC-M Operation Manual

RED EPIC OPERATION GUIDE

APPENDIX A: UPGRADING CAMERA FIRMWARE

Your RED DSMC camera functionality may be upgraded by installing the latest firmware.
Camera firmware is identified by Version and SVN number, which will be displayed by the camera on the
LCD display when SYSTEM INFO is selected. A higher number reflects a later release.
https://support.red.com/home
Make a habit of frequently visiting to check for later versions of camera
firmware, Operations Guide updates, and post-production software.
Your REDMOTE also requires a firmware upgrade. For more information on upgrading your REDMOTE, go to
UPGRADE REDMOTE FIRMWARE.
VERIFY CURRENT CAMERA FIRMWARE
With the camera ON, select SECONDARY MENUS > SETTINGS > MAINTENANCE > SYSTEM INFO.
The camera's P.I.N. number and current firmware version will be displayed.

UPGRADE PROCEDURE

1. Download current firmware from http://www.RED.com/support.
2. Follow instructions in "read_me..." file.
RESTORE DEFAULT FACTORY SETTINGS
To restore factory default settings, when the camera turned off, press and hold the power button until the
fan begins to operate at high speed. This takes approximately fifteen seconds.
COPYRIGHT © 2013 RED.COM, INC 955-0002_v4.0, REV-C | 169