Microphone Audio) - Red Epic EPIC-M BUILD V3.3 Operation Manual

MIC-1, MIC-2 (MICROPHONE AUDIO)
Two 3.5mm phone jacks on the front of the brain support two independent channels of balanced or
unbalanced microphone level analog audio inputs.
PIN
A (TIP)
B (RING)
C (SLEEVE)
Microphone Level analog audio input signals are routed via a high quality pre-amplifier and soft limiter,
whose Gain may be controlled using the Input Level control to achieve the desired audio reference /
recording level. Microphone inputs support +48V @ 10mA Phantom Power as a user selectable option. If
To assist with reference level setup, the camera provides a color-coded Peak Level Meter in the
Graphical User Interface, with witness marks that indicate 0dBu (-20dbFS) and 0Vu (- 16dBFS) levels.
Peak Level Meter range is –36dBu to +20dBu (-54dBFS to 0dBFS) and provides input clip indication.
NOTE: A pre-fabricated XLR to TRS interface cable, Part Number 790-0229, is available from RED
Digital Cinema.
955-0002_v3.3, Rev-B
C
Microphone Input Connector
SIGNAL DESCRIPTION
IN + Mic Input (+48V Phantom Power)
IN - Mic Input (+48V Phantom Power)
GND Camera ground
COPYRIGHT © 2012 RED.cm, Inc.
A
B
DIRECTION
In
In
--
167 167