Appendix A: Upgrading Camera Firmware; Verify Current Camera Firmware; Upgrade Procedure; Restore Default Factory Settings - Red Epic EPIC-M BUILD V3.3 Operation Manual

APPENDIX A: UPGRADING CAMERA FIRMWARE

Your RED DSMC camera functionality may be upgraded by installing the latest firmware.
Camera firmware is identified by Version and SVN number, which will be displayed by the camera on the
LCD display when SYSTEM INFO is selected. A higher number reflects a later release.
Make a habit of frequently visiting
firmware, Operations Guide updates, and post-production software.
Your REDMOTE also requires a firmware upgrade. Go to APPENDIX E: REDMOTE OPERATION >
MAINTENANCE > UPGRADING REDMOTE FIRMWARE.

VERIFY CURRENT CAMERA FIRMWARE

With the camera ON, select SECONDARY MENUS > SETTINGS > MAINTENANCE > SYSTEM INFO.
The camera's P.I.N. number and current firmware version will be displayed.

UPGRADE PROCEDURE

1. Download current firmware from http://www.RED.com/support.
2. Follow instructions in "Epic_read_me..." file.

RESTORE DEFAULT FACTORY SETTINGS

To restore factory default settings, when the camera turned off, press and hold the power button until
the fan begins to operate at high speed. This takes approximately fifteen seconds.
955-0002_v3.3, Rev-B
www.RED.com/support
COPYRIGHT © 2012 RED.cm, Inc.
to check for later versions of camera
159 159