APPENDIX A: UPGRADING CAMERA FIRMWARE
RED EPIC camera functionality may be upgraded by installing the latest firmware.
Camera firmware is identified by Version and SVN number, which will be displayed by the camera on the
LCD display when SYSTEM INFO is selected. A higher number reflects a later release.
Make a habit of frequently visiting
www.RED.com/support
to check for later versions of camera
firmware, Operations Guide updates, and postproduction software.
Your REDmote also requires a firmware upgrade. Go to APPENDIX E: REDMOTE OPERATION >
MAINTENANCE > UPGRADING REDMOTE FIRMWARE.
VERIFY CURRENT CAMERA FIRMWARE
With the camera ON, select SECONDARY MENUS > SETTINGS > MAINTENANCE > SYSTEM INFO.
The camera's P.I.N. number and current firmware version will be displayed.
UPGRADE PROCEDURE
1. Download v2.0.5 firmware from http://www.RED.com/support.
2. Uncompress the v2.0.5 firmware zip file.
3. Using RED STATION® REDMAG 1.8", copy the "force_upgrade" folder and its contents to the top
level of the REDMAG¨ 1.8" SSD directory.
4. Eject or unmount the SSD, then remove the SSD from RED STATION.
5. Ensure camera is powered down.
Version 2.0.5R1
143
DECEMBER 20, 2011
©2011 RED.COM INC.