GRAPHTEC GL820-UM-851 Quick Start Manual page 17

Midi logger

Table of Contents

　(4) Move the cursor to the "Level" parameter next to the "Mode" parameter

and then press the ENTER key.

　(5) The input box shown in the following screen is displayed. Select "20".

Use the

and

keys to move to the cursor to the second digit from the right,

and the

and

keys to change the value. Press the ENTER key.

　(6) When the screen changes to the following screen, move the cursor to

the

button and then press the ENTER key.

　(7) The screen returns to the TRIG menu screen. Press the QUIT key to return

the GL820 to the Free Running status.

　(8) Press the START/STOP key to start data capture. If the trigger

condition has not been satisfied, the GL820 goes into the "Armed" status

as shown on the following screen.

　　　When the trigger condition has been satisfied, data capture starts and the

"Memory Recording" is displayed. Elapsed time for data capture appears.

Numerical value input box

Lower and upper limit for setting.

Waveform area for confirmationLower

•Use the

and

keys to change the values.

•Use the

and

keys to move the digit.

•Use the ENTER key to enter the value.

•Use the QUIT key to cancel the setting .

Table of Contents

Show Quick Links

Table of Contents

Gl820