Group Remote Controller Info; Weekly Timer - Fujitsu Airstage V series Service Manual

5-7-2 Group Remote Controller
UTB - YDA/GDA

WEEKLY TIMER

1. WEEKLY TIMER
Instructions related to heating are applicable to "HEAT PUMP MODELS" and "HEAT RECOVERY MODELS" only.
The timer function is not available depending on the initial setting.
The timer can be set up on different schedule for every day of the week.
The timer can be set up 4 times in a day.
Each timer can be set up operation/stop, operation mode, setting temperature.
To start / cancel the WEEKLY timer operation
To set the WEEKLY timer
1
CLOCK ADJUST
Press the PROGRAM(CLOCK
ADJUST ) button.
* Don't press the PROGRAM
button for more than 2 seconds,
otherwise it enters to the
time setting mode.
3
Day of the week setting
DAY
Press the DAY button to select the day of the week
* For ALL, all of the days can be set together when a
appears around each day.
4
Time setting
advance
reverse
Press the Set Time buttons to set the time in 10-minute increments.
Press the ALL TIMER button to start or cancel the WEEKLY timer operation.
If at least one timer is operated,
the timer operations of all of the indoor units are canceled at one time.
If all of timers are not operated,
the timer operations of all of the indoor units are set up at one time.
Press the Timer Mode(DELETE) button to start or cancel the WEEKLY timer operation.
The operating time for the current day is displayed.
2
Press the Select buttoin to select the indoor unit.
*If the "ALL indoor unit" is selected, the timer of all of registered indoor units
are set up at one time.
ALL S
SUN
no setting
(cancel)
ex. 24-hour display
05-11
M T W
MON TUE WED THE
ALL indoor unit
T F S
FRY SAT