Using The Handset; Using The Speakerphone - Cisco MGCP IP Phone Administrator's Manual

Using the Cisco MGCP IP Phone
This chapter describes basic Cisco MGCP IP phone functions. Your call agent or service provider might
offer additional phone features and capabilities not described in this chapter. Refer to the documentation
from your call agent or service provider for instructions on using those features.
This chapter includes the following sections:
•
•
•
•
•
•
•

Using the Handset

To place and answer calls with the handset, simply lift the handset. To change from handset to
speakerphone, press SPEAKER and hang up the handset.

Using the Speakerphone

To place and answer calls using the speakerphone, press SPEAKER. You can use the speakerphone with
all Cisco MGCP IP phone features. To change from speakerphone to handset, lift the handset.
Using the Headset
To place and answer calls using the headset, plug the approved headset into the back of the phone base
and press HEADSET.
You can use the headset with all Cisco MGCP IP Phonefeatures. The volume and mute controls also
adjust volume to the ear piece and mute the speech path of the headset. The headset activation key is
located on the front of the phone.
Using the Handset, page 4-1
Using the Speakerphone, page 4-1
Using the Headset, page 4-1
Adjusting the Handset, Speakerphone, and Headset Volume, page 4-2
Adjusting the Ringer Volume, page 4-2
Changing the LCD Contrast, page 4-2
Muting a Call, page 4-2
Cisco MGCP IP Phone Administrator Guide, Release 5.0 and Release 5.1
C H A P T E R
4
4-1