Cisco MGCP IP Phone Administrator's Manual page 37

Chapter 3 Configuring the Cisco MGCP IP Phone
Table 3-4
Abbreviation
IST
ZP6
SUM
WAST
HST
JST
CAST
EAST
EADT
NZST
Example 3-1
# Any or All of these options can be configured
# in the user config file (MGC<MAC ADDR>.cnf).
# The user config file options override any options
# specified here in the Default Config File.
# :sample user config file name: MGC003E362FE92.cnf
# image_version - specifies which image version should
#
#
#
image_version: P0M3-04-2-00
# tftp_cfg_dir - specifies the directory to use for the
#
#
#
tftp_cfg_dir : ""
# phone_password - specifies the password used to telnet
#
# phone_prompt - specifies the prompt the phone will display
#
#
phone_password : "password"
phone_prompt : "MGCP Phone"
# sntp_mode - specifies the mode the SNTP server uses
#
Time Zone Abbreviations
GMT Offset
GMT+05:30
GMT+06:00
GMT+06:30
GMT+07:00
GMT+08:00
GMT+09:00
GMT+09:30
GMT+10:00
GMT+11:00
GMT+12:00
Sample MGCP Default Configuration File
be on the phone. This is used to upgrade from an
MGCP image to a different MGCP image. The OS79XX.TXT
file is only used to switch protocols (ie. SIP to MGCP).
retrieving the MGC<MAC ADDR>.cnf file. The base
for the directory is the base TFTP Server directory.
tftp_cfg_dir is limited to 64 characters.
to the phone. phone_password is limited to 32 characters.
when logged in from the console or telnet session.
phone_prompt is limited to 16 characters.
(unicast, multicast, anycast, directedbroadcast)
Cities Time Zone Names
Bombay, Delhi IST (Indian Standard Time)
Colombo USSR-zone5, ZP6 (GMT Plus 6 Hours)
North Sumatra NST (North Sumatra Time)
Bangkok, Hanoi SST (South Sumatra Time), USSR-zone6,
WAST (West Australian Standard Time)
Beijing, Hong Kong CCT (China Coast Time),
HST (HongKong Standard Time),
USSR-zone7,
WADT (West Australian Daylight Time)
Tokyo, Seoul JST (Japan Standard Time/Tokyo),
KST (Korean Standard Time), USSR-zone8
Darwin SAST (South Australian Standard Time) ,
CAST (Central Australian Standard Time)
Brisbane, Guam GST (Guam Standard Time),USSR-zone9,
EAST (East Australian Standard Time)
Solomon Islands USSR-zone10,
EADT (East Australian Daylight Time)
Auckland NZT (New Zealand Time/Auckland),
NZST (New Zealand Standard Time),
IDLE (International Date Line East)
Cisco MGCP IP Phone Administrator Guide, Release 5.0 and Release 5.1
Using Configuration Files
3-9