Table of Contents
Advertisement
Chapter 3
Configuring the Cisco MGCP IP Phone
These configuration files are not required; however, it takes longer (approximately 20 seconds) for the
Cisco MGCP IP phone to boot because it is waiting for the timeout on the TFTP server.
Table 3-2
parameters are optional; the phone boots with the default or existing flash configuration. Only
image_version is required to upgrade to a new image.
Table 3-2
Default MGCP Configuration File Parameters
Parameter
date_format
directory_url
dst_auto_adjust
dst_offset
dst_start_day
dst_start_day_of_week
dst_start_month
dst_start_time
shows the default MGCP IP Phone configuration file parameters in alphabetical order. All
Description
The format to use for dates. Valid values are:
M/D/Y—Month/day/year
•
•
D/M/Y—Day/ month/year
•
Y/M/D—Year/month/day
•
Y/D/M—Year/day/month
•
Y-M-D—Year-month-day
•
YY-M-D—4-digit year-month-day
The default is M/D/Y.
URL of the external directory server . This URL is accessed when the Directory
key is pressed and the External Directory option is selected. For example, use
directory_url: "http://10.10.10.10/CiscoServices/Directory.asp".
Whether or not daylight saving time (DST) is automatically adjusted on the
phones. Valid values are 0 (disable automatic DST adjustment) or 1 (enable
automatic DST adjustment). The default is 1.
Offset from the phone's time when DST is in effect. When DST is over, the
specified offset is no longer applied to the phone's time. Valid values are
hour/minute, -hour/minute, +hour/minute, hour, -hour, and +hour.
Day of the month on which DST begins.
Valid values are 1 through 31 for the days of the month or 0 when specifying
relative DST to specify that this field be ignored and that the value in the
dst_start_day_of_week parameter be used instead.
Day of the week on which DST begins.
Valid values are Sunday or Sun, Monday or Mon, Tuesday or Tue, Wednesday
or Wed, Thursday or Thu, Friday or Fri, Saturday or Sat, or Sunday or Sun or 1
through 7 with 1 being Sunday and 7 being Saturday. When specifying the name
of the day, the value is not case-sensitive. In the United States, the default value
is Sunday.
Month in which DST starts. Valid values are January, February, March, April,
May, June, July, August, September, October, November, and December or 1
through 12 with January being 1 and December being 12. When specifying the
name of a month, the value is not case-sensitive. In the United States, the default
value is April.
Time of day on which DST begins. Valid values are hour/minute (02/00) or hour
(02:00). In the United States, the default value is 02:00.
Cisco MGCP IP Phone Administrator Guide, Release 5.0 and Release 5.1
Using Configuration Files
3-3
Advertisement
Table of Contents
