Cisco MGCP IP Phone Administrator's Manual page 52

Command
MGCP Phone> show {arp | debug | strpool |
memorymap | dump | malloctable | stacks | status
| abort_vector | flash | timers | dspstate | rtp
| tcp | lists | network | config | mgcp_lists |
dialplan | timers | ethernet | ip}
Cisco MGCP IP Phone Administrator Guide, Release 5.0 and Release 5.1
5-4
Chapter 5 Monitoring and Maintaining the Cisco MGCP IP Phone
Purpose
Shows information about the Cisco MGCP IP phone. The
following keywords are used:
arp—Displays contents of the ARP cache.
•
• debug—Shows which debug command modes are activated.
• strpool—Shows the string library pool of strings.
• memorymap—Shows memory mapping table, including
free, used, and wasted blocks.
• dump—Displays a dump of the memory contents.
• malloctable—Shows the memory allocation table.
stacks—Shows tasks and buffer lists.
•
status—Shows the current phone status, including errors.
•
abort_vector—Shows the address of the last recorded abort
•
vector.
flash—Shows Flash memory information.
•
timers—Shows a list of timers, including the expiration time
•
and other data about each.
dspstate—Shows the digital signal processor (DSP) status,
•
including whether the DSP is ready, the audio mode, if
keepalive pending is turned on, and the ringer state.
rtp—Shows packet statistics for the RTP streams.
•
tcp—Shows the status of TCP ports, including the state
•
(listen or closed) and the port number.
network—Shows network information, such as phone
•
platform, DHCP server, phone IP address and subnet mask,
default gateway, address of the TFTP server, phone MAC
address, domain name, and phone name.
• config—Shows the current Flash memory configuration,
including network information, phone label and password,
SNTP server address, daylight saving time (DST)
hinformation, time and date format, CA address, and MGCP
input and output port numbers.
mgcp_lists—Shows the filter list and duplicate message list
•
lengths.
dialplan—Shows the phone dial plan.
•
timers—Shows the current status of the platform timers.
•
• ethernet—Shows the network statistics in the Network
Statistics menu.
ip—Shows the IP statistics.
•