Table of Contents
Advertisement
Installing the Cisco MGCP IP Phone
This chapter contains the following sections:
•
•
•
•
Safety Notices
Read the following safety considerations before installing or using the Cisco MGCP IP phone.
Translations of the warnings are available in
the
Regulatory Compliance and Safety Information for the Cisco IP Phone 7960, 7940, and 7910 Series
includes regulatory compliance information about your phone, which your system administrator can
review.
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
Warning
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents.
Read the installation instructions before you connect the system to its power source.
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone
network-voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits.
Some LAN and WAN ports use RJ-45 connectors. Use caution when connecting cables.
Safety Notices, page 2-1
Prerequisites, page 2-2
Connecting the Cisco MGCP IP Phone, page 2-2
Using the Cisco MGCP IP Phone with a Catalyst Switch, page 2-4
Appendix A, "Translated Safety Warnings."
Cisco MGCP IP Phone Administrator Guide, Release 5.0 and Release 5.1
C H A P T E R
2
Additionally,
2-1
Advertisement
Table of Contents
