Network Setting - Avermedia AVerDiGi MXR6004 User Manual

3.6

Network Setting

Click Update to accept the new settings, click Cancel to exit without saving, and click Default to
revert back to original factory setting.
(1)
(2)
(3)
(4)
(1) Server Name
Assign a name for the DVR unit. Alphabet letters and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it
accessible via internet using WebViewer and Remote Console. To select all the cameras, enable
the ALL check box.
(3) Main Configuration
Set the DVR IP address and Remote Console Port. You need this when accessing DVR server
from the remote location via internet. MXR series provides dual Gigabit LAN port to balance the
bandwidth usage of the DVR system. User can configure one LAN port is for receiving data from
IP camera. And the other one is for remote accessing to DVR system for recorded video viewing.
Click Setting to setup DVR IP.
The default IP of the DVR server is 192.168.2.2 for LAN1 (lower LAN port in the back of the DVR) or
192.168.3.2 for LAN2 (upper LAN port in the back of the DVR).
48
(5)
(6)
(7)