Table of Contents
Advertisement
Chapter 3
Configuring the System
While the recording task is in process, the icon turns red. Click the icon again to stop
the recording task. The icon will return to gray.
3.2.4 Network Setting
Click
to start the networking configuration.
Transmitting Cameras
Transmitting cameras allow users to monitor remotely. You can decide which cameras
can be remotely monitored. Tick "all" box to select all camera numbers, or select the
desired camera numbers respectively.
Server Configuration
IP: You need to enable remote view server via TCP/IP. The system will catch the fixed
IP address automatically.
If you have two Network Interface Cards in the system, it will
catch the first IP. Execute "IPCONFIG" in Command Prompt to
know the IP sequence.
Port: Please enter the port for a remote console. The default port is 8080.
WebCam PORT: Please enter the WebCam port. The default port is 80.
84
Advertisement
Table of Contents
