To Mask/Shield An Area On The Screen; To Show And Change The Color Of The Mask; To Playback Encrypted Video; Network Setting - Avermedia NV 3000 User Manual

5.3.1

To Mask/Shield an area on the screen:

1. In the Mask/Shield Edit section, activate the Enable Mask/Enable Shield check box.
2. In the Edit section, select between Mask or Shield and click the
3. Click and drag a frame on the (9) Video Screen to create Mask or Shield area.
5.3.2

To show and change the color of the Mask

1. Enable the Show Mask check box.
2. In the Color section, select the color and click
5.3.3

To Playback Encrypted Video

On Playback, Webcam, and Remote Console video screen, just click
password to decrypt and playback the video.
To encrypt the recoded video back, click
i
It is important to encrypt the video again, to avoid unauthorized user viewing the
video.
5.4

Network Setting

In the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit
without saving, and click Default to revert back to original factory setting. For the network
service ports that use by DVR server, please see
(1)
(2)
(3)
(4)
(5)
(6)
(1) Server Name
Assign a name for the DVR unit. Alphabet letters and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make
button.
and enter a WRONG password.
Appendix C.
75
button.
and enter the correct
(7)
(8)
(9)
(10)