52 | Using the MC67
2 On a alpha-numeric keypad, simultaneously press the Power button and the W and C keys.
3 The MC67 shuts down and then reboots.
Suspend Mode
The MC67 goes into suspend mode when the user presses the Power button or after a period of inactivity (set in the
Display settings window).
To wake the MC67 from Suspend mode, press the Power button.
The Lock screen displays. Slide
is enabled, the Pattern screen appears instead of the Lock screen. See
Note:
If the user enters the PIN, password or pattern incorrectly five times, they must wait 30 seconds before
trying again.
If the user forgets the PIN, password or pattern contact the system administrator.
Figure 31: Lock Screen
Send Feedback
| January 2014 | MN000115A01
to the right toward
to unlock the screen. If the Pattern screen unlock feature
Un-Locking the Screen on page
48.