Suspend Mode; Assisted Gps - Motorola MC9500-K User Manual

Suspend Mode

To place the MC9500-K in suspend mode:
Press the red Power button to suspend the MC9500-K. The Power Key Action screen appears.
1.
PowerKey Action Window
Figure D-19
Tap Suspend icon.
2.
The MC9500-K goes into suspend mode.
3.

Assisted GPS

GPS can be used in stand-alone or Assisted GPS (A-GPS) modes. A Stand-alone GPS receiver downloads data
from GPS satellites. It can take several minutes to get a fix. By using GPS Location servers, A-GPS dramatically
improves the performance of the Time To First Fix (TTFF) of GPS receivers by providing them with data that they
would ordinarily have to download from the GPS satellites and other aiding data that helps the acquisition. With the
A-GPS data, GPS receivers can operate faster and more reliably.
A-GPS follows the Secure User Plane Location (SUPL) protocol which allows the MC9500-K to communicate with
a location server.
To configure SUPL on the MC9500-K:
Tap Start > Settings > System > GPS Setup icon.
1.
Keypads D - 19