Using The Imd; Turning On The Imd; Turning Off The Imd; Suspend Mode - Motorola F3124A User Manual

Using the IMD

Turning On the IMD

Press the Power Button/Status LED (see Figure 1) to turn on the IMD.

Turning Off the IMD

When the IMD is On, hold the Power Button/Status LED pressed for at
least four seconds - the IMD will remember the last used screen and will
go into deep sleep mode - no information will be lost. Once turned on
again, the IMD will show the last screen that was in use.

Suspend Mode

When the IMD is turned on, momentarily press on the Power Button/Sta-
tus LED to enter Suspend mode (see Figure 1). During Suspend mode the
display turns off and the Power Button/Status LED slowly blinks green. To
resume operation, press momentarily on the Power Button/Status LED
again.
In Suspend mode, battery power is saved by an automatic turn off of the
display and the computer sections of the IMD. During Suspend mode, the
Bluetooth radio continues to operate. When the IMD resumes operation, it
returns to the screen shown prior to Suspend mode.
The IMD may also move to Suspend automatically if not in use for some
time.
Use Suspend mode as often as possible to conserve battery power.
10