Suspend Mode - Motorola TC70 User Manual

56 | Using the TC70
Perform a hard reset if the TC70 stops responding.
Procedure:
1 Simultaneously press the Power, PTT and Volume Up buttons for at least four seconds.
Figure 40: Three Button Reset
2 When the screen turns off, release the buttons.
3 The TC70 reboots.

Suspend Mode

The TC70 goes into suspend mode when the user presses the Power button or after a period of inactivity (set in the
Display settings window).
To wake the TC70 from Suspend mode, press the Power button.
The Lock screen displays. Slide
feature is enabled, the Pattern screen appears instead of the Lock screen. See
Note:
If the user enters the PIN, password or pattern incorrectly five times, they must wait 30 seconds before
trying again.
If the user forgets the PIN, password or pattern contact the system administrator.
to the right toward to unlock the screen. If the Pattern screen unlock
Un-Locking the Screen on page 51.