Led Indicators; Table 9: Led Indications; Figure 32: Led Indicators - Motorola MC67 User Manual

LED Indicators

The MC67 has three light emitting diode (LED) indicators. The Data Capture LED indicates status for scanning. The
Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates Wide Area
Network (WAN) radio status.

Figure 32: LED Indicators

1 2 3
Note: For information about scanning/decoding, see
WAN radio status and settings, see

Table 9: LED Indications

LED State
1 – Data Capture LED
Solid Green
Flashing Green
Solid Red (after Safe Battery Swap mode)
2 – Charging/Battery Status LED
Slow Blinking Amber
Solid Amber
Fast Blinking Amber
Off
3 – WAN Radio Status LED
Slow Blinking Green
Off
Data Capture on page
Calls on page 55, or refer to the MC67 Integrator Guide.
Indication
Successful decode/capture.
Software initiated notification, such as Email.
MC67 is shutting down for battery replacement.
Main battery in MC67 is charging.
Main battery in MC67 is fully charged.
Charging error.
MC67 not charging.
RF (WAN) radio is on.
RF (WAN) radio is off.
MN000115A01 | January 2014 |
Using the MC67 | 53
83. For information about
Send Feedback