Installing A Microsd Card; Figure 4: Lift Sim Slot Holder Door; Figure 5: Insert Microsd Card In Holder - Motorola MC67 User Manual

26 | Getting Started
5 Power on the MC67.

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to
the documentation provided with the card for more information, and follow the manufacturer's recommendations for
use.
Caution: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
Procedure:
1 To install the microSD card, remove the handstrap.
2 Lift the rubber access door.
3 Slide the SIM card holder door up to unlock.
4 Lift the SIM card holder door.

Figure 4: Lift SIM Slot Holder Door

1
2
3
5 Lift the microSD card holder door.
6 Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each side of
the door.

Figure 5: Insert microSD Card in Holder

1
2
7 Close the card holder door and push down until it is securely in place.
8 Close the SIM card holder door and slide down until it locks into place.
9 Close the rubber access door.
Send Feedback | January 2014 | MN000115A01
1
2
3
Rubber Access Door
SIM Card Holder Door
microSD Card Holder Door
1
2
microSD Card
Holding Tab