Four Slot Battery Charger; Cables; Table 19: Troubleshooting The Four Slot Battery Charger; Table 20: Troubleshooting The Cables - Motorola MC67 User Manual

Symptom

Four Slot Battery Charger

Table 19: Troubleshooting The Four Slot Battery Charger

Symptom
Battery not charging.

Cables

Table 20: Troubleshooting the Cables

Symptom
MC67 battery is not
charging.
During data
communication, no
data transmits, or
transmitted data was
incomplete.
Possible Cause
Ambient temperature of
the cradle is too warm.
Possible Cause
Battery was removed from
the charger or charger was
unplugged from AC
power too soon.
Battery is faulty.
Battery contacts not
connected to charger.
Possible Cause
MC67 was disconnected
from AC power too soon.
Battery is faulty.
The MC67 is not fully
attached to power.
Cable was disconnected
from MC67 during
communications.
Incorrect cable
configuration.
Communication software
is not installed or
configured properly.
Maintenance and Troubleshooting | 129
Action
The MC67 battery charging LED slowly blinks amber when
the MC67 is correctly inserted and charging.
Move to an area where the ambient temperature is between
-20 °C and 50 °C 50 °C (-4 °F and 122 °F).
Action
Re-insert the battery in the charger or re-connect the charger's
power supply. The 3600 mAh battery fully charges in less than
six hours.
Verify that other batteries charge properly. If so, replace the
faulty battery.
Verify that the battery is seated in the battery well correctly
with the contacts facing down.
Action
Connect the power cable correctly. Confirm main battery is
charging. The 3600 mAh battery fully charges in less than six
hours.
Verify that other batteries charge properly. If so, replace the
faulty battery.
Detach and re-attach the power cable to the MC67, ensuring it
is firmly connected.
Re-attach the cable and retransmit.
See the system administrator.
Perform setup as described in the MC67 Integrator Guide.
MN000115A01 | January 2014 | Send Feedback