Digital Camera Scanning; Figure 59: Aiming Pattern; Figure 60: Pick List Mode With Multiple Bar Codes In Aiming Pattern - Motorola MC67 User Manual

Figure 59: Aiming Pattern

Figure 60: Pick List Mode with Multiple Bar Codes in Aiming Pattern

5 The Data Capture LED lights green and a beep sounds, by default, to indicate the bar code was decoded
successfully.
6 Release the scan button.
Note: Imager decoding usually occurs instantaneously. The MC67 repeats the steps required to take a
digital picture (image) of a poor or difficult bar code as long as the scan button remains pressed.
7 The bar code content data displays in the text field.

Digital Camera Scanning

To read a bar code, a scan-enabled application is required. The MC67 contains the DataWedge application that allows
the user to enable the camera, decode the bar code data and display the bar code content.
Procedure:
1 Ensure that an application is open on the MC67 and a text field is in focus (text cursor in text field).
2 Point the camera lens on the back of the MC67 at a bar code.
MN000115A01 | January 2014 |
Data Capture | 85
Send Feedback