Four Slot Ethernet Cradle; Four Slot Spare Battery Charger - Motorola MC3000 User Manual

5 - 6 MC3000 User Guide

Four Slot Ethernet Cradle

Table 5-4 Troubleshooting the Four Slot Ethernet Cradle
Problem
Mobile computer amber
Charge LED Indicator does
not light when mobile
computer inserted.
Mobile computer battery is
not charging.
During data communication,
no data was transmitted, or
transmitted data was
incomplete.

Four Slot Spare Battery Charger

Table 5-5 Troubleshooting the Four Slot Spare Battery Charger
Symptom
Spare Battery
Charging LED does
not light when
spare battery is
inserted.
Cause
Cradle is not receiving power.
Mobile computer is not
correctly seated.
Mobile computer was removed
from cradle or cradle was
unplugged from AC power too
soon.
Battery is faulty.
The mobile computer is not
fully seated in the cradle.
Mobile computer removed from
cradle during communication.
Incorrect cable configuration.
Ethernet connection error. Link
LED is not lit (see
page 4-6).
Possible Cause
Spare battery is not Remove and re-insert the spare battery into the charging slot,
correctly seated. ensuring it is correctly seated.
Ensure the power cable is connected securely to
both the cradle and to AC power.
Remove and re-insert the mobile computer into
the cradle, ensuring it is correctly seated.
Ensure cradle is receiving power. Ensure the
mobile computer is seated correctly. If the mobile
computer battery is fully depleted, it can take up
to four hours to fully recharge a Standard Battery
and it can take up to six hours to fully recharge an
Extended Life Battery.
Verify that other batteries charge properly. If so,
replace the faulty battery.
Remove and re-insert the mobile computer into
the cradle, ensuring it is correctly seated.
Replace mobile computer in cradle and
retransmit.
See the system administrator or refer to the
MC3000 Integrator Guide.
See the system administrator. Probable Ethernet
connection error.
Link LED on
Solution
Solution