Troubleshooting - Infopia finetest IGM-0005A Operation Manual

Battery
Your finetest TM Meter comes with one 3.0V (CR2032 or equivalent) lithium batteries. The batteries will provide you with enough power to
perform about 5,000 tests. When replacing the battery, 3.0V (CR2032 or equivalent) lithium battery can only be used.
The meter will alert you when the power is getting low by displaying this symbol (symbol of battery and
its low sign) or when the meter does not power on by any means.
To replace the battery, make sure that the Meter is in the OFF position when changing the battery.
When changing the battery, be careful of the polarity of the battery which is printed in the battery deck
of the meter.
After changing the battery, "Setting The Meter" , MUST be done again for secure and accurate test
results.
[ 23 ]
finetest TM

Troubleshooting

Problems that you may encounter : Following may help you to identify certain problems but may not represent all the problem that occurs.
Please avoid any IMPROPER use of the meter and the parts associated with the finetest
MESSAGE CAUSED BY
Problem with the Meter
Problem with the test strip
The meter has not been properly set
TM System.
WHAT TO DO
If problem persist,contact your local representative.
With a new test strip and sufficient blood sample, re-test.
See "Setting The Meter"
INFOPIA [ 24 ]