Reviewing Your Results - Infopia finetest IGM-0005A Operation Manual

Testing Your Blood
STEP 3. After you hear the "beep" sound, the test will begin automatically and your results will appear after 9 seconds. It should begin
counting down from 9 seconds to 1 second on the LCD display window. The LCD display window will indicate the result of your
blood glucose level.
STEP 4.
Record the result value in your finetest TM logbook. This will help you reference your blood glucose levels historically.
When the testing is complete, discard the used test strip and lancet to a proper place. Make sure to retain all necessary
items in the leather case for your next test. Clean the meter if necessary according to
finetest TM
"Maintaining the finetest
TM Meter" .
CAUTION : If you receive any error messages please refer to the "Troubleshooting" section of this Manual.
[ 19 ]
finetest TM

Reviewing Your Results

The finetest TM ( Meter saves up to 200 test results in built-in memory and records the average glucose level for the number of days in
which you had preset to be calculated and saved. These values will appear on the LCD display window by recalling any time you want to
see it. The newest result will replace the oldest beyond the 200 saved data.
The meter enters "Reviewing Your Results" mode by pressing the MEM button.
The first display shows the current date and time, then the
average glucose level calculation over the period that was
already pre-set.
If no data was saved, the If no data was saved for the
meter will not display any pre-set days for the average
result and powers off glucose calculation, the
automatically after 3 meter will display a zero and
seconds. display each value of the past
results
INFOPIA [ 20 ]