Testing Your Blood - Infopia finetest IGM-0005A Operation Manual

Collecting a Drop of Blood
4. Hold the tip in one hand and pull 5. Release the sleeve. It will
on the sliding barrel with other automatically contract and move
hand. Pull the ends apart and you back to its original position near
will feel a click. This indicates that the trigger hub.
the lancing device is in a locked
position ready for lancing.
Maintaining your Lancing Device
- Unscrew the lancing device tip. Carefully stick the protective disk cover back on the used lancet.
- Grip the holder firmly and pull the lancet safely out of holder. Screw the tip back on the lancing device.
- Discard the used lancet to a proper place. Clean the lancing device if blood or stain remains.
CAUTION :
·Use a new sterile lancet every time you test.
·Do not use lancet if protective cover has been removed or damaged.
·Never share a lancet with anyone.
[ 15 ]
finetest TM

Testing Your Blood

Before testing, be sure to read this section and the test strip
package insert found in the test strip box carefully. Make sure
you have all the necessary items to begin testing:
·finetest
·finetest
·Lancing Device
·Sterile Lancets
6. Place the lancing device against
the tip of the finger. Press the
trigger button. Your blood sample
should now be ready to be applied
on the test strip. Lift the lancing
device out and away.
TM Meter
TM Blood Glucose Test Strip
WARNING :
To reduce the chance of infection:
·The Lancing Device and Sterile Lancets should NOT be shared with others.
It is only for your own personal use.
·Always use a new, sterile lancet. Lancets are for single use only.
·Avoid getting hand lotion, oils, dirt, or debris in or on the Lancets and the Lancing Device.
·Dry your hands completely before testing.
INFOPIA [ 16 ]