Using The Interactive Features Over A Network; Precautions When Connecting To A Projector On A Different Subnet - Epson EB-710Ui User Manual

Using the Interactive Features over a Network

You can use your projector in computer interactive mode over a network.
If you want to annotate when using computer interactive mode over a
network, you need to use Easy Interactive Tools (or another annotation
program). Easy Interactive Tools allows you to use various drawing tools,
treat the drawing area as a page, and save your drawings as a file for a later
use. You can install Easy Interactive Tools from the EPSON Projector
Software for Easy Interactive Function CD. You can also download the
software from the Epson website.
Use Epson iProjection (Windows/Mac) to setup your projector on a computer
network and use computer interactive mode over the network.
Select Use Interactive Pen on the General settings tab and Transfer layered
window on the Adjust performance tab.
See the Epson iProjection Operation Guide (Windows/Mac) for instructions.
• Number of pens or fingers you can use at the same time is as follows:
a
• Windows: two pens and six fingers
• Mac: one pen or one finger
• The response may be slower over the network.
• You cannot change the Pen Operation Mode setting from the
projector's Extended menu.
• You can connect up to four projectors at one time using Epson
iProjection. When connected to multiple projectors, computer
interactive mode functions for any projector. Operations performed
on one projector are reflected in other projectors.
• To use annotation mode over the network, clear Use Interactive Pen
on the General settings tab and Transfer layered window on the
Adjust performance tab in Epson iProjection and then reconnect to
the network.
g g Related Links
• "Precautions when Connecting to a Projector on a Different Subnet"
Precautions when Connecting to a Projector on a
Different Subnet
Follow these precautions when you connect to a projector on a different
subnet using Epson iProjection (Windows/Mac) and use interactive features:
• Search for the projector on the network by specifying the projector's IP
address. You cannot search for it by specifying the projector name.
• Make sure that you get an echo reply back from the network projector when
sending an echo request by the ping command. When the Internet Control
Message Protocol (ICMP) option is disabled on the router, you can connect
to the projector at remote locations even if you cannot get the echo reply
back.
• Make sure the following ports are opened.
Port Protocol
3620 TCP/UDP
3621 TCP
3629 TCP
• Make sure that the MAC address filtering and application filtering options
are configured properly on the router.
• When bandwidth management is applied for communications between
locations, and Epson iProjection goes over the controlled bandwidth, you
may not be able to connect to the projector at remote locations.
Epson does not guarantee the connection to the projector on a
a
different subnet using Epson iProjection even if you meet the above
requirements. When considering the implementation, be sure to test
p.108
the connection in your network environment.
Usage Communication
For connection and two-way
control
For transferring images two-way
For controlling projector two-way
108