Installation Using Usb Connection - Motorola MC40 User Manual

•
Android Debug Bridge, see
•
Mobility Services Platform (MSP) for Android.

Installation Using USB Connection

To install an application using a USB connection:
Connect the USB/Charge cable to the MC40 and the host computer. See
1.
information.
Open the Notification Panel.
2.
Touch USB Connected.
3.
Touch Turn on USB storage.
4.
The MC40 displays as a Removable Disk on the host computer.
5.
On the host computer, copy the application .apk file from the host computer to the Removable Disk.
6.
unmount.
7.
On the MC40, touch Turn off USB storage.
8.
Touch .
9.
Touch > File Explorer to view files on the On-device Storage.
10.
Locate the application .apk file.
11.
Touch the application file to begin the installation process.
12.
To confirm installation and accept what the application affects, touch Install. otherwise touch Cancel.
13.
Accept Installation Screen
Figure 8-1
Touch Open to open the application or Close to exit the installation process. The application appears in
14.
the Launcher.
Using Android Debug Bridge on page 8-6
Application Deployment
Chapter 2, Accessories for setup
8 - 5