CHAPTER 1
Introduction
This chapter provides information about the MC40, accessories, charging, and resetting the MC40.
Unpacking the MC40
Carefully remove all protective material from the MC40 and save the shipping container for later storage and
shipping. Verify that you received the following equipment:
•
MC40
•
Lithium-ion battery
•
Regulatory Guide
•
Quick Start Guide.
Inspect the equipment. If any equipment is missing or damaged, contact the Motorola Solutions Global
Customer Support immediately. See
Prior to using the MC40 for the first time, remove the protective shipping film that covers the scan window,
display and camera window.
Getting Started
To start using the MC40 for the first time:
Install the main battery.
1.
Charge the MC40.
2.
Power on the MC40.
3.
GETTING STARTED
Service Information on page xiii
for contact information.