Configuring Bluetooth Tethering; Figure 91: Usb Cable Connection To Host Computer - Motorola LEX L10g User Manual

MN002858A01-A
Chapter 8: Wireless
NOTICE: After connecting to a computer using USB tethering, the computer disconnects from
the network connection, for a short time, and does not have access to the Internet (the LEX
L10g becomes the primary network adapter).
Procedure:
1 Connect the LEX L10g to a host computer with the USB cable.

Figure 91: USB Cable Connection to Host Computer

A USB icon appears at the top of the screen, and the notification Connected as a media
device appears briefly at the top of the screen.
2 Tap .
3 Tap .
4 Tap More ... .
5 Tap Tethering & portable hotspot.
6 Check USB tethering.
The host computer is now sharing the LEX L10g data connection.
Postrequisites: To stop sharing the data connection, uncheck USB tethering or disconnect the USB
cable.
NOTICE: The USB cover needs to be fully seated after use.
8.1.1.2

Configuring Bluetooth Tethering

Prerequisites: Configure the host computer to obtain its network connection using Bluetooth. For
more information, see the host computer's documentation.
When and where to use: Use this procedure to tether Bluetooth to share the data connection with a
host computer.
Procedure:
1 Pair the LEX L10g with the host computer.
130 Send Feedback