Download Print this page

Advertisement

MC40
USER GUIDE

Advertisement

Troubleshooting

   Also See for Motorola MC40

   Summary of Contents for Motorola MC40

  • Page 1

    MC40 USER GUIDE...

  • Page 3: Copyrights

    3 | Copyrights Copyrights The products described in this document may include copyrighted computer programs. Laws in the United States and other countries preserve for certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted computer programs contained in the products described in this document may not be copied or reproduced in any manner without the express written permission.

  • Page 5: Revision History

    5 | Revision History Revision History Changes to the original guide are listed below: Change Date Description -01 Rev A 08/30/2013 Initial release. -02 Rev A 04/24/2014 Add RS507 support, Bluetooth pairing utility. Update PTT Express application. -03 Rev A 02/10/2015 Zebra rebranding.

  • Page 7: Table Of Contents

    Setting the Date and Time........................... 25 Display Setting..............................26 Setting the Screen Brightness........................26 Setting Screen Rotation........................... 26 Changing the Screen Timeout Setting.....................27 General Sounds Setting............................27 Chapter 2: Using the MC40.................. 31 Home Screen............................... 31 Status Bar................................32 Status Icons..............................33 Notification Icons............................ 34 Managing Notifications............................35 Quick Settings..............................

  • Page 8

    Camera Settings............................58 Video Settings............................59 Camera (KitKat)..............................59 Taking Photos............................60 Taking a Panoramic Photo........................62 Recording Videos............................ 63 MC40 Photo Settings..........................65 MC40 Video Settings..........................66 Gallery................................. 67 Working with Albums..........................67 Share an Album........................... 68 Get Album Information....................... 68 Deleting an Album........................

  • Page 9

    Disconnecting from a Bluetooth Device......................95 Unpairing a Bluetooth Device..........................95 Chapter 7: Accessories...................97 MC40 Accessories...............................97 Micro USB Cable..............................98 Single Slot Charge Cradle........................... 99 Five Slot Charge Only Cradle........................... 100 Four Slot Battery Charger..........................102 Chapter 8: Maintenance and Troubleshooting..........105 Maintaining the MC40............................105...

  • Page 10

    10 | Contents Battery Safety Guidelines..........................105 Cleaning Instructions............................106 Cleaning the MC40............................107 Connector Cleaning..........................107 Cleaning Cradle Connectors..........................107 Troubleshooting the MC40..........................108 Single-Slot Charge Cradle Troubleshooting..................... 110 Five-Slot Charge Only Cradle CRDUNIV-40–5000R Troubleshooting............110 Four-Slot Battery Charger SACMC40XX-4000R Troubleshooting..............111 Chapter 9: Technical Specifications..............113 MC40 Technical Specifications........................

  • Page 11: About This Guide

    Kernel version – Displays the kernel version number. • Build number – Displays the software build number. Jelly Bean Build Number The build number contains the software revision number and whether the MC40 is VoIP telephony ready. MN000111A04-A | July 2015...

  • Page 12: Chapter Descriptions

    V = VoIP telephony ready. • F = FIPS & VoIP telephony ready. KitKat Build Number The build number contains the software revision number and whether the MC40 is VoIP telephony ready and FIPS ready. Example Build Number: 0z-xx–xx-4AJ22–K–y0–M1–mmddyy •...

  • Page 13: Icon Conventions

    (when it is not part of the current procedure, for instance), or tell the reader where something is located on the screen. There is no warning level associated with a note. Related Documents • MC40 Quick Start Guide, p/n 72-166941-xx • MC40 Regulatory Guide, p/n 72-166942-xx •...

  • Page 14

    14 | About This Guide Figure 1: Manufacturing Label Location Zebra responds to calls by email or telephone within the time limits set forth in support agreements. If your problem cannot be solved by the Zebra Support Center, you may need to return your equipment for servicing and will be given specific directions.

  • Page 15: Chapter 1: Getting Started

    15 | Getting Started Chapter Getting Started This chapter provides the features of the MC40 and explains how to set it up for the first time. Features - Standard Version Figure 2: Front View Table 1: Features - Front View...

  • Page 16

    Button Remap Program. See MC40 Integrator Guide for more infor- mation. Power Button Press and hold to turn on the MC40. Press to turn on or off the screen. Press and hold to select one of these options: •...

  • Page 17: Features - New Speaker Version

    Takes photos, videos, and captures bar code data. Right Scan/Action Initiates scanning when a scan application is enabled (default). Program- Button mable using Button Remap Program. See MC40 Integrator Guide for more information. Volume Control Increases and decrease audio volume. Programmable using Button Remap Program.

  • Page 18

    Determines ambient light for controlling display backlight intensity and Sensor for turning off display when in handset mode. Right LED Indicates battery charge state when MC40 is in a charger. Indicates decode functionality. Lights green indicating a successful de- code. Touch Screen Displays all information needed to operate the MC40.

  • Page 19

    Button Remap Program. See MC40 Integrator Guide for more infor- mation. Power Button Press and hold to turn on the MC40. Press to turn on or off the screen. Press and hold to select one of these options: •...

  • Page 20: Unpacking

    Provides audio output for video and music playback. Finger Strap Plug Covers mounting area for optional Finger Strap. Unpacking Carefully remove all protective material from the MC40 and save the shipping container for later storage and shipping. Verify the following items are in the box: •...

  • Page 21: Charging The Battery

    Battery Safety Guidelines on page 105. Before using the MC40 for the first time, charge the main battery until the Right light emitting diode (LED) turns solid green (see Table 5: Battery Charge LED Status on page 21 for charge status indications). To charge the MC40, use a cable or a cradle with the appropriate power supply.

  • Page 22: Powering On The Mc40

    Powering On the MC40 If the MC40 did not turn on when the battery was installed, press the Power button until the Right and Left LEDs flash once. The splash screen displays for about a minute as the MC40 initializes its flash file system. Note that these windows also appear upon reset.

  • Page 23: Battery Management

    9 Press the Power button to turn on the MC40. Battery Management Note: Prior to checking the battery charge level, remove the MC40 from any AC power source (cradle or cable). To check the charge status of the main battery, touch >...

  • Page 24: Monitor Battery Usage

    Some applications include buttons that open screens with settings to adjust power use. Low Battery Notification When the battery charge drops below 20% (Jelly Bean only), the MC40 sounds an alert and displays a notice to connect the MC40 to power.

  • Page 25: Setting The Date And Time

    Getting Started | 25 When the battery charge drops below 15%, the MC40 sounds an alert and displays a notice to connect the MC40 to power. When the battery charge drops below 12%, the MC40 sounds an alert and screen turns off. The Right and Left LEDs light red while goes into critical suspend mode to save data.

  • Page 26: Display Setting

    The user can set the MC40 screen to rotate 90 degrees left or right. Procedure: Touch 2 Touch Display. 3 In the Display settings screen, check Auto-rotate screen to set the MC40 to automatically switch orientation when the MC40 is rotated. 4 Touch July 2015 | MN000111A04-A...

  • Page 27: Changing The Screen Timeout Setting

    Getting Started | 27 Changing the Screen Timeout Setting To set the MC40 to turn off after a short period of non-use: Procedure: Touch 2 Touch Display 3 Touch Sleep 4 Select a value from the Sleep window. Options: •...

  • Page 28

    28 | Getting Started Figure 14: Volumes Dialog Box (Jelly Bean) Figure 15: Volumes Dialog Box (KitKat) - Controls the music, games and media volume. - Controls the ringtone and system notification volume (Jelly Bean only). Controls the ringtone volume (KitKat only).

  • Page 29

    Getting Started | 29 - Places the ringtone in silent mode. - Places the ringtone in vibrate mode. - Places the ringtone in sound mode. Note that on KitKat, when the user presses the volume buttons, the Volume dialog appears with only the ringtone control visible.

  • Page 31: Chapter 2: Using The Mc40

    31 | Using the MC40 Chapter Using the MC40 This chapter describes the screens, status and notification icons, and controls on the MC40, and provides basic instructions for using the MC40. Home Screen The Home screen displays when the MC40 turns on. Depending upon the configuration, the Home screen might appear different.

  • Page 32: Status Bar

    3 — All Apps Icon Opens the APPS window. 4 — Settings Icon Opens the Settings window. 5 — Shortcut Icons Opens applications installed on the MC40. See Application Shortcuts and Widgets on page for more information. 6 — Widgets Launches stand-alone applications that run on the Home screen.

  • Page 33: Status Icons

    Using the MC40 | 33 Figure 18: Notification and Status Icons Notifications icons Status icons If there are more notifications than can fit in the Status bar, displays indicating that more notifications exist. Open the Notifications panel to view all notifications and status.

  • Page 34: Notification Icons

    Indicates that the battery is fully charged. Indicates that the battery is charging. Indicates that the MC40 is calculating the battery capacity level (Jelly Bean only). Indicates that the MC40 is calculating the battery capacity level (KitKat only). Indicates an unknown charging error.

  • Page 35: Managing Notifications

    Using the MC40 | 35 Icon Description Indicates that a problem with sign-in or sync has occurred. Indicates that the device is uploading data. Indicates that the Internal Storage is almost full. Indicates that the device is downloading data when animated and download is complete when stat- Indicates that the device is connected via USB cable.

  • Page 36: Quick Settings

    36 | Using the MC40 Figure 19: Notification Panel To respond to a notification, open the Notifications Panel and then touch a notification. The Notifications Panel closes and the subsequent activity is dependent on the notification. To clear all notifications, open the Notifications Panel and then touch .

  • Page 37: Application Shortcuts And Widgets

    Using the MC40 | 37 Figure 20: Quick Settings • Owner – Display the owner’s contact image. Touch to open the owner’s contact information. User must first set up contact information in People application. • Brightness – Opens the Brightness setting dialog box to set the screen brightness.

  • Page 38: Removing An App Or Widget From The Home Screen

    38 | Using the MC40 2 Drag the item to a new location. Pause at the edge of the screen to drag the item onto an adjacent Home screen. 3 Lift finger to place the item on the Home screen.

  • Page 39: Removing A Folder

    Using the MC40 | 39 4 Touch anywhere on the Home screen to close the folder. The folder name appears under the folder. Figure 24: Renamed Folder Removing a Folder Procedure: 1 Touch and hold the folder icon until it enlarges.

  • Page 40: Using The On-screen Keyboard

    AppGallery - Provides links to utilities and demonstration applications that can be installed on the MC40 (KitKat only). Bluetooth Pairing Utility – Use to pair Bluetooth devices with the MC40 by scanning a bar code. Table continued… July 2015 | MN000111A04-A...

  • Page 41

    Clock - Use to schedule alarms for appointments or as a wake-up. DataWedge - Enables data capture using the camera or optional scanner. Device-Config - Use to configure multiple MC40 devices. See the MC40 Integrator Guide for more information (Jelly Bean only).

  • Page 42

    MC40 User Guide - Displays the On-device User Guide (Jelly Bean only). MLog Manager – Use to capture log files for diagnostics. See MC40 Integrator Guide for more information. MobiControl Stage – Opens the MobiControl Stage application to stage the device.

  • Page 43: Accessing Applications

    Description Sound Recorder - Use to record audio. StageNow - Allows the MC40 to stage a device for initial use by initiating the deployment of set- tings, firmware and software (KitKat only). TecDocs - Displays the On-device User Guide (KitKat only).

  • Page 44: Switching Between Recent Applications

    Un-Locking the Screen Use the Lock screen to protect access to data on the MC40. Some email account require locking the screen. Refer to the MC40 Integrator Guide for information on setting up the locking feature. The Locking feature functions differently in Single User mode or Multiple User mode.

  • Page 45

    Using the MC40 | 45 Figure 27: Lock Screen Figure 28: PIN Screen MN000111A04-A | July 2015...

  • Page 46: Multiuser Mode

    46 | Using the MC40 Figure 29: Pattern Screen Figure 30: Password Screen MultiUser Mode With MultiUser login, multiple users can log on to the device with each user having access to various applications and features. When enabled, the Login screen appears after powering on, resetting or after the device wakes from suspend mode.

  • Page 47: Multiuser Logout

    Using the MC40 | 47 Figure 31: Multiple User Log In Screen 2 In the Password text field, enter the password. 3 Touch OK. After a resume from suspend, the user must enter the password. MultiUser Logout Procedure: 1 Drag the Status Bar down from the top of the screen.

  • Page 48: Suspend Mode

    48 | Using the MC40 Suspend Mode The MC40 goes into suspend mode when the user presses the Power button or after a period of inactivity (set in the Display settings window). To wake the MC40 from Suspend mode, press the Power button.

  • Page 49: Chapter 3: Applications

    49 | Applications Chapter Applications This section describes the applications installed on the device. File Browser Use the File Browser application to view and mange files on the device. To open File Browser, touch > Figure 33: File Browser Screen The address bar (1) indicates the current folder path.

  • Page 50: Datawedge Demonstration

    Opens a menu to view the application information or to set the application DataWedge profile. Note: See the MC40 Integrator Guide for information on DataWedge configuration. Either press a Scan key or touch the yellow scan button in the application to enable data capture. The captured data appears in the text field below the yellow button.

  • Page 51: Ptt Express Voice Client

    Applications | 51 PTT Express Voice Client Note: PTT Express Voice Client creates Push-To-Talk (PTT) communication capability between disparate enterprise devices. Leveraging existing Wireless Local Area Network (WLAN) infrastructure, PTT Express delivers simple PTT communication without the need of a voice communication server. •...

  • Page 52: Enabling Ptt Communication

    52 | Applications Item Description Enable/Disable Turns the PTT service on and off. Switch Notification Icons Indicates the current state of the PTT Express Voice client. Table 12: PTT Express Default User Interface Descriptions Status Icon Description Indicates that PTT Express Voice client is disabled. Indicates that PTT Express Voice client is enabled but not connected to a WLAN.

  • Page 53: Selecting A Talk Group

    PTT communication. When the Wired Headset is used, Group Calls and Private Responses can also be initiated using the headset Talk button. Figure 36: MC40 PTT Buttons Group Call Hard Button...

  • Page 54: Creating A Group Call

    54 | Applications Figure 37: Wired Headset Talk Button Creating a Group Call Procedure: 1 Press and hold the Group Call button (or the Talk button on the headset) and listen for the talk tone to play. If a busy tone is heard, release the button and wait a moment before making another attempt. Ensure that PTT Express and the WLAN are enabled.

  • Page 55: Responding With A Private Response With The Wired Headset

    3 Slide the Enable/Diable Switch to the OFF position. The button changes to OFF. 4 Touch Camera (Jelly Bean) This section provides information for taking photos and recording videos using the integrated digital cameras. Note: The MC40 saves photos and videos on the internal storage. Taking Photos Note: Camera settings are described in...

  • Page 56: Taking A Panoramic Photo

    56 | Applications Figure 38: Camera Mode If necessary, touch the options bar and touch Touch to adjust exposure, flash, and other settings using the camera settings. See Camera Settings on page for more information. Touch and to adjust the zoom level. 6 Frame the subject on screen.

  • Page 57: Recording Videos

    Applications | 57 Touch the options bar and touch Figure 39: Panoramic Mode 4 Frame one side of the scene to capture. Touch and slowly start panning across the area to capture. A small white square appears inside the button indicating that the shot is in progress.

  • Page 58: Camera Settings

    58 | Applications Figure 40: Video Mode Touch to adjust exposure, flash, and other settings using the video settings. See Video Settings on page 59 for more information. Touch and to adjust the zoom level. 5 Point the camera and frame the scene. Touch to start recording.

  • Page 59: Video Settings

    Cloudy - Adjust the white balance for a cloudy environment. Camera (KitKat) This section provides information for taking photos and recording videos using the integrated digital cameras. Note: The MC40 saves photos and videos on the internal storage. MN000111A04-A | July 2015...

  • Page 60: Taking Photos

    60 | Applications Figure 41: Camera Photo Screen Camera Options — Touch to select Camera, Video or Panorama mode. Shutter button - Touch to take a photo, a panoramic photo or to record a video. Photo Settings – Touch to select camera settings. Taking Photos Procedure: Touch...

  • Page 61

    Applications | 61 Figure 42: Camera Mode If necessary, touch the camera options icon and touch 4 Frame the subject on the screen. 5 To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear on the screen.

  • Page 62: Taking A Panoramic Photo

    62 | Applications Figure 43: Camera Zoom 6 Touch an area on the screen to focus. The focus circle appears on the screen. The two horizontal bars turn green when in focus. 7 Touch The camera takes a photo and a shutter sound plays. Alternately, touch and hold to focus first, before taking a photo;...

  • Page 63: Recording Videos

    Applications | 63 Figure 44: Panoramic Mode Touch the options bar and touch 4 Frame one side of the scene to capture. 5 Touch and slowly start panning across the area to capture. A small white square appears inside the button indicating the capture is in progress.

  • Page 64

    64 | Applications Figure 45: Video Mode Touch the options bar and touch 4 Point the camera and frame the scene. 5 To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear on the screen.

  • Page 65: Mc40 Photo Settings

    The device starts recording the video. The video time remaining appears in the top left of the screen. 7 Touch to end recording. The video momentarily displays as a thumbnail in the upper right corner. MC40 Photo Settings When in Photo mode, photo settings are displayed on screen. Touch to display the photo settings options. Touch to display the photo setting options.

  • Page 66: Mc40 Video Settings

    Options: Sports, Night, Auto (default), Sunset, or Party, . Picture Quality - Touch to select picture quality setting. Options:Normal, Fine or Super fine (default). MC40 Video Settings When in Video mode, video settings are displayed on screen. Touch to display the video settings options.

  • Page 67: Gallery

    Applications | 67 Gallery Note: The device supports the following image formats: jpeg, gif, png and bmp. The device supports the following video formats: H.263, H.264 and MPEG4 Simple Profile. Use Gallery to: • view photos • play videos • perform basic editing of photos •...

  • Page 68: Share An Album

    68 | Applications Figure 50: Photos Inside an Album Swipe left or right to scroll images across the screen. Share an Album Procedure: Touch Touch 3 Touch and hold an album until it highlights. 4 Touch other albums as required. Touch .

  • Page 69: Deleting An Album

    Applications | 69 Deleting an Album To delete an album and its contents: Procedure: Touch Touch 3 Touch and hold an album until it highlights. 4 Check other albums to delete. Ensure that other albums are selected. Touch > Delete. 6 In the Delete selected item? menu, touch OK to delete the album.

  • Page 70: Rotating A Photo

    70 | Applications 7 Touch the photo to view the controls. 8 Double-tap the screen to zoom in or pinch two fingers together or spread them apart to zoom in or out. 9 Drag the photo to view parts that are not in view. Rotating a Photo Procedure: 1 Touch a photo to view the controls.

  • Page 71: Setting A Photo As A Contact Icon

    Applications | 71 Setting a Photo as a Contact Icon Procedure: Touch Touch 3 Touch an album to open it. 4 Touch the photo to open it. Touch 6 Touch Set picture as. 7 Touch Contact photo. 8 In the People application, touch a contact. 9 Touch the blue box and crop the photo accordingly.

  • Page 72: Deleting A Photo

    72 | Applications Deleting a Photo Procedure: Touch Touch 3 Touch an album to open it. 4 Touch a photo to open it. Touch (Jelly Bean) or > Delete (KitKat). 6 Touch OK to delete the photo. Working with Videos Use Gallery to view videos and share videos.

  • Page 73: Sharing A Video

    Applications | 73 Sharing a Video Procedure: Touch Touch 3 Touch an album to open it. 4 Touch a video to open it. Touch . The Share menu appears. 6 Touch the application to use to share the selected video. The application selected opens with the video attached to a new message.

  • Page 74: Disabling Elemez Data Collection

    74 | Applications Figure 54: Elemez Application Disabling Elemez Data Collection The user can disable the Elemez application from collection specific data in the background and sending it to Zebra Technologies. Procedure: 1 From the Home screen, touch 2 Touch Manage Apps. 3 Swipe left or right until the ALL tab displays.

  • Page 75: Mlog Manager

    Applications | 75 Touch 9 Touch Enable Elemez. MLog Manager Use MLog Manager to capture log files for diagnostics. See the MC40 Integrator Guide for detailed information on configuring the application. Figure 55: MLog Manager People Use the People application to manage contacts.

  • Page 76: Editing People

    76 | Applications 3 Type the contact’s name and other information. Touch a field to start typing, and swipe down to view all categories. 4 To add more than one entry for a category – for example, to add a work address after typing a personal address – touch Add new for that field.

  • Page 77: Chapter 4: Data Capture

    By default, the good decode beep is set to system volume (Music and Media). The good decode beep can be set to another sound (Notifications or Alarms) and the volume can be independently controlled. See the DataWedge section in the MC40 Integrator Guide for more information. DataWedge is installed and enabled on the MC40 by default.

  • Page 78: Rs507 Hands-free Imager

    78 | Data Capture • Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal, QR, PDF417, and 2D matrix code types. • Cross-hair reticle for easy point-and-shoot operation. • Picklist mode to decode a particular bar code from many in the field of view. The solution uses the advanced camera technology to take a digital picture of a bar code, and executes state-of-the-art software decoding algorithms to extract the data from the image.

  • Page 79: Bar Code Capture With Imager

    The Left and Right LEDs light light green and a beep sounds to indicate the bar code was decoded successfully. Note that when the MC40 is in Pick List Mode, the MC40 does not decode the bar code until the center of the crosshair touches the bar code.

  • Page 80: Bar Code Capture With Integrated Camera

    6 The captured data appears in the text field. Bar Code Capture with RS507 Hands-Free Imager Prerequisites: Pair the RS507 with the MC40. See Pairing the RS507 Hands-Fee Imager Using SSI on page 82 Pairing the RS507 Hands-Free Imager Bluetooth HID on page 82 for more information.

  • Page 81

    Data Capture | 81 Figure 61: Bar Code Scanning with RS507 3 Press and hold the trigger. The red laser aiming pattern turns on to assist in aiming. Ensure the bar code is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions. The RS507 LEDs light green, a beep sounds to indicate the bar code was decoded successfully.

  • Page 82: Pairing The Rs507 Hands-fee Imager Using Ssi

    The RS507 emits a high/low/high/low beeps. The Scan LED flashes green indicating that the RS507 is attempting to establish connection with the MC40. When connection is established, the Scan LED turns off and the RS507 emits one string of low/high beeps.

  • Page 83: Reading Magnetic Stripe Cards

    Procedure: 1 Ensure that MSR input is enabled in DataWedge and the cursor is in a text field. 2 Grip MC40 firmly in one hand. 3 Hold magnetic stripe card firmly in the other hand. 4 Align the magnetic stripe on the card toward the display and swipe the card smoothly in either direction.

  • Page 84

    84 | Data Capture Figure 66: Swiping a Magnetic Stripe Card 5 The captured data appears in the text field. July 2015 | MN000111A04-A...

  • Page 85: Improper Swiping

    Data Capture | 85 Improper Swiping Figure 67: Do Not Start Swipe in Middle of Card MN000111A04-A | July 2015...

  • Page 86

    86 | Data Capture Figure 68: Avoid Thumb Hitting Device Figure 69: Do Not Hold End of Card While Swiping July 2015 | MN000111A04-A...

  • Page 87: Datawedge

    The captured bar code data is converted to keystrokes and sent to the target application as if it was typed on the keypad. To configure DataWedge refer to the MC40 Integrator Guide. Enabling DataWedge...

  • Page 88: Disabling Datawedge

    88 | Data Capture Disabling DataWedge Procedure: Touch Touch Touch 4 Touch Settings. 5 Touch the DataWedge enabled checkbox. The blue checkmark disappears from the checkbox indicating that DataWedge is disabled. 6 Touch July 2015 | MN000111A04-A...

  • Page 89: Chapter 5: Wlan

    Wireless local area networks (WLANs) allow the MC40 to communicate wirelessly inside a building. Before using the MC40 on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes known as infrastructure). The infrastructure and the MC40 must both be properly configured to enable this communication.

  • Page 90

    Connect. See the system administrator for more information. The MC40 obtains a network address and other required information from the network using the dynamic host configuration protocol (DHCP) protocol. To configure the MC40 with a fixed internet protocol (IP) address, Refer to the MC40 Integrator Guide for more information.

  • Page 91: Chapter 6: Bluetooth

    91 | Bluetooth Chapter Bluetooth Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (10 meters (32.8 feet) ) communication and low power consumption.

  • Page 92: Bluetooth Profiles

    MC40. • Object Push Profile (OPP) - Allows the MC40 to push and pull objects to and from a push server. • Dial-up Networking (DUN) - Allows the MC40 to access the Internet and other dial-up services using a Bluetooth enabled mobile phone (Jelly Bean only).

  • Page 93: Enabling Bluetooth

    5 If Bluetooth is off, slide the switch to the ON position. Touch Bluetooth. 7 The MC40 begins searching for discoverable Bluetooth devices in the area and displays them under Available Devices. 8 Scroll through the list and select a device. The Bluetooth pairing request dialog box appears.

  • Page 94: Changing The Bluetooth Name

    11 The Bluetooth device is added to the Paired Devices list and a trusted (“paired”) connection is established. Changing the Bluetooth Name By default, the MC40 has a generic Bluetooth name that is visible to other devices when connected. Procedure:...

  • Page 95: Selecting Profiles On The Bluetooth Device

    Bluetooth | 95 Selecting Profiles on the Bluetooth Device Some Bluetooth devices have multiple profiles. To select a profile: Procedure: Touch Touch Bluetooth. 3 If Bluetooth is not turned on, slide the blue switch to the ON position. In the PAIRED DEVICES list, touch next to the device name.

  • Page 97: Chapter 7: Accessories

    Charges the MC40. Charge Only Cra- Five Slot Charge CRDUNIV-XX-5000R Provides charging for up to five MC40 devices or four MC40 de- Only Cradle Base vices and one Four Slot Battery Charger using optional Charging Cups. Requires additional power supplies.

  • Page 98: Micro Usb Cable

    2.5 mm wired headset for PTT and VoIP telephony communica- tions. Micro USB Cable Use the Micro USB cable to connect the MC40 to the power supply for charging or to a host computer for communication. July 2015 | MN000111A04-A...

  • Page 99: Single Slot Charge Cradle

    Figure 74: Charging Using the Micro USB Cable Communication When the MC40 is connected to a host computer using the Micro USB cable, the MC40 appears as a Removable Disk on the host computer. Refer to the MC40 Integrator Guide for more information.

  • Page 100: Five Slot Charge Only Cradle

    About device > Battery Information. Note that charging is intelligently controlled by the MC40. To accomplish this, for small periods of time, the MC40 or accessory alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC40 or accessory indicates when charging is disabled due to abnormal temperatures via its Right LED.

  • Page 101

    • Provides mounting for a Four Slot Battery Charger (requires separate power supply). See the MC40 Integrator Guide for setup and configuration instructions. To charge the MC40, insert the MC40 into an open slot. Figure 77: Charging MC40s and Spare Batteries The MC40’s Right LED shows the status of the battery charging.

  • Page 102: Four Slot Battery Charger

    102 | Accessories Note that charging is intelligently controlled by the MC40. To accomplish this, for small periods of time, the MC40 or accessory alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC40 or accessory indicates when charging is disabled due to abnormal temperatures via its Right LED. See...

  • Page 103

    Accessories | 103 Table 14: Spare Battery Charge LED Status Status Indications No battery in a slot. Battery is not charging. Battery is not inserted correctly in the charger. Charger is not powered. Slow Blinking Amber Battery is charging. Solid Green Charging complete.

  • Page 105: Chapter 8: Maintenance And Troubleshooting

    The touch-sensitive screen of the MC40 is glass. Do not to drop the MC40 or subject it to strong impact. • Protect the MC40 from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and keep it away from heat sources.

  • Page 106: Cleaning Instructions

    106 | Maintenance and Troubleshooting • Do not dispose of batteries in fire. • In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. •...

  • Page 107: Cleaning The Mc40

    They may be cleaned as frequently as required, but it is advisable to clean the camera window periodically when used in dirty environments to ensure optimum performance. Cleaning the MC40 Housing Using the alcohol wipes, wipe the housing including keys and in-between keys.

  • Page 108: Troubleshooting The Mc40

    Decode LED blinks amber. Battery did not charge. Battery failed. Replace battery. If the MC40 still does not operate, perform a hard- ware reset. See Resetting the Device on page MC40 was re- Insert MC40 in cradle. The 2680 mAh battery fully charges in less moved from than four hours.

  • Page 109

    MC40 Integrator Guide for DataWedge configuration. bar code type. MC40 is not pro- If the MC40 does not beep on a good decode, set the application to grammed to gen- generate a beep on good decode. erate a beep.

  • Page 110: Single-slot Charge Cradle Troubleshooting

    Table 17: Troubleshooting the Five-Slot Charge Only Cradle Problem Cause Solution Battery is not charging. MC40 removed Replace the MC40 in the cradle. The 2680 mAh battery charges in ap- from the cradle too soon. proximately four hours. Touch > About device >...

  • Page 111: Four-slot Battery Charger Sacmc40xx-4000r Troubleshooting

    Maintenance and Troubleshooting | 111 Four-Slot Battery Charger SACMC40XX-4000R Troubleshooting Table 18: Troubleshooting the Four-slot Battery Charger Problem Cause Solution Battery not charging. Battery was re- Re-insert the battery in the charger or re-connect the charger’s power moved from the supply.

  • Page 113: Chapter 9: Technical Specifications

    113 | Technical Specifications Chapter Technical Specifications The following sections provide technical specification for the device. MC40 Technical Specifications The following table summarizes the MC40’s intended operating environment and technical hardware specifications. Table 19: MC40 Technical Specifications Item Description Physical Characteristics Dimensions Height: 143.9 mm (5.66 in.)

  • Page 114

    114 | Technical Specifications Item Description Performance Characteristics Texas Instruments OMAP 4430 @ 800 MHz, dual-core (Jelly Bean). Texas Instruments OMAP 4430 @ 1 GHz, dual-core (KitKat). Operating System Android-based ASOP 4.1.1 (Jelly Bean) or 4.4.4 (KitKat). Memory 1 GB RAM, 8 GB Flash. Output Power (USB) Docking Connector: 5 VDC @ 500 mA max.

  • Page 115

    Technical Specifications | 115 Item Description PMKID Caching, Opportunistic Key Caching (OKC), Cisco CCKM, 802.11r, Ze- bra Aggregated FT (KitKat) Wireless PAN Data and Voice Communications Bluetooth Class II, v 2.1 with EDR (Jelly Bean) v 4.0 with Low Energy (KitKat); integrated antenna.

  • Page 116: Single-slot Charge Cradle Crdmc40xx-1000r Technical Specifications

    274 g (9.67 oz) Input Voltage 5 VDC Power Consumption (with 6 watts MC40) Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Storage Temperature -40 °C to 70 °C (-40 °F to 158 °F) Charging Temperature 0 °C to 40 °C (32 °F to 104 °F)

  • Page 117: Five-slot Charge Only Cradle Crduniv-40-5000r Technical Specifications

    Cups and one Battery Charger Cup) Input Voltage 12 VDC Power Consumption (with 37.5 watts MC40) Operating Temperature 0 °C to 50 °C (32 °F to 122 °F) Storage Temperature -40 °C to 70 °C (-40 °F to 158 °F) Charging Temperature 0 °C to 40 °C (32 °F to 104 °F)

  • Page 118: Four-slot Battery Charger Sacmc40xx-4000r Technical Specifications

    257 g (9.07 in.) Input Voltage 12 VDC Power Consumption (with 25 watts MC40) Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Storage Temperature -40 °C to 70 °C (-40 °F to 158 °F) Charging Temperature 0 °C to 40 °C (32 °F to 104 °F)

  • Page 119

    Index | 119 Index adaptive frequency hopping harmful ingredients albums home button 16, android version application shortcuts approved cleanser keyboard back button 16, battery light sensor 15, charging management replacement bluetooth memory connecting to a device menu button 16, profiles micro USB cable Bluetooth microphone 15,...

  • Page 120

    120 | Index set time set time zone setting camera 58, video 59, single-slot charge only cradle soft reset spare battery status bar system sounds taking a panoramic photo 56, taking photos touch screen 16, vibrate on touch video settings 59, videos 55, 57, 59,...

  • Page 122

    Zebra Technologies Corporation 3 Overlook Point Lincolnshire IL, U.S.A. http://www.zebra.com Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2015 Symbol Technologies LLC a subsidiary of Zebra Technologies Corporation MN000112A04 Revision A - July 2015...

Comments to this Manuals

Symbols: 0
Latest comments: