Screen Unlock Settings; Single User Mode; Set Screen Unlock Using Pin - Motorola MC40 User Manual

7 - 2 MC40 Integrator Guide

Screen Unlock Settings

Use the Location & Security settings to set preferences for locking the screen. Touch
Location & security.
Options vary depending upon the application's policy, for example, email.
NOTE
If the user forgets the PIN, password or pattern, the system administrator must perform an Enterprise
Reset to access the MC40.
•
Set up screen lock/Change screen lock - Touch to configure the MC40 to require a pattern, PIN, or
password to unlock the screen.
•
Screen unlock security - Touch to select the type of unlock security.
•
None - Disable screen unlock security.
•
Pattern - Draw a pattern to unlock screen. See
more information.
•
PIN - Enter a numeric PIN to unlock screen. See
more information.
•
Password - Enter a password to unlock screen. See
page 7-3
Lock the screen to protect access to data on the MC40. Some email accounts require locking the screen. The
Locking feature functions differently in Single-user versus Multiple-user mode.

Single User Mode

When locked, a pattern, PIN or password is required to unlock the MC40. Press the Power button to lock the
screen. The MC40 also locks after a pre-defined time-out.
Press and release the Power button to wake the MC40. The Lock screen displays.
Slide up to unlock the screen. If the Pattern screen unlock feature is enabled, the Pattern screen appears
instead of the Lock screen.
If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen.

Set Screen Unlock Using PIN

To set the MC40 to have the user enter a PIN:
Touch > Settings > Location & security > Set up screen lock > PIN.
1.
for more information.
Screen Unlock Using Pattern on page 7-4
Set Screen Unlock Using PIN on page 7-2
Set Screen Unlock Using Password on
> Settings >
for
for