Download Print this page

Advertisement

MC75 Enterprise Digital Assistant
User Guide

Advertisement

Troubleshooting

   Summary of Contents for Motorola MC75

  • Page 1

    MC75 Enterprise Digital Assistant User Guide...

  • Page 3

    MC75 Enterprise Digital Assistant User Guide 72E-103077-02 Rev. A August 2008...

  • Page 4: Patents

    Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola.

  • Page 5: Revision History

    Revision History Changes to the original manual are listed below: Change Date Description -01 Rev. A 6/10/08 Initial release. -02 Rev. A 08/14/08 Add re-boot after installing SIM card. Add dual line SIM support.

  • Page 6

    MC75 User Guide...

  • Page 7: Table Of Contents

    Charging the Main Battery and Memory Backup Battery ............1-7 Charging Spare Batteries ......................1-8 Charging Temperature ......................1-8 Powering On the MC75 ........................1-8 Calibrating the Screen ........................1-8 Checking Battery Status ........................ 1-8 Adjusting the Handstrap ........................1-10 Removing the Screen Protector ......................

  • Page 8

    MC75 User Guide Chapter 2: Using the MC75 Introduction ............................2-1 Today Screen ............................2-1 Status Icons ............................2-2 Programs ............................. 2-4 Settings ..............................2-7 Battery Status Indications ........................2-10 Battery Reserve Options ........................ 2-11 Main Battery Temperature Notifications ..................2-12 Performing a Warm Boot .......................

  • Page 9

    Table of Contents Enabling Bluetooth ......................... 4-3 Bluetooth Power States ......................... 4-4 Cold Boot ..........................4-4 Warm Boot ..........................4-4 Suspend ........................... 4-4 Resume ............................ 4-4 Modes ..............................4-4 Wizard Mode ..........................4-4 Explorer Mode ..........................4-4 Available Services ..........................4-9 File Transfer Services ........................

  • Page 10

    Using a Dual Line SIM ......................... 5-26 Chapter 6: Accessories Introduction ............................6-1 Single Slot USB/Serial Cradle ......................6-2 Charging the MC75 Battery ......................6-2 Charging the Spare Battery ......................6-3 Battery Charging Indicators ......................6-3 Charging Temperature ......................6-3 Four Slot Ethernet Cradle ........................

  • Page 11

    Charging Temperature ......................6-4 Charging ............................6-5 Battery Charging Indicators ......................6-5 Charging Temperature ......................6-5 Charging the MC75 Battery ......................6-6 Removing the MC75 ........................ 6-6 Charging the Spare Battery ......................6-7 Battery Charging Indicators ......................6-8 Charging Temperature ......................6-8 MC75 Battery Shim Installation ......................

  • Page 12

    MC75 User Guide Appendix A: Technical Specifications MC75 Technical Specifications ......................A-1 MC75 ............................. A-1 Single Slot USB/Serial Cradle ......................A-6 Four Slot Ethernet Cradle ......................A-6 Four Slot Charge Only Cradle ......................A-7 Four Slot Battery Charger ......................A-7 Magnetic Stripe Reader .........................

  • Page 13: About This Guide

    The documentation set for the MC75 provides information for specific user needs, and includes: • MC75 Quick Start Guide - describes how to get the MC75 EDA up and running. • MC75 User Guide - describes how to use the MC75 EDA.

  • Page 14: Configurations

    MC75 User Guide Configurations This guide covers the following configurations: Data Operating Configuration Radios Display Memory Keypads Capture System MC7506 WPAN: Bluetooth 3.5” VGA 128 MB RAM/ 1D laser Windows Numeric or WWAN: HSDPA Color 256 MB Flash scanner, 2D...

  • Page 15

    About This Guide xiii The second line lists the operating system version and the build number. The last part of the build number represents the AKU number. For example, Build 18552.0.7.5 indicates that the device is running AKU version 0.7.5. OEM Version To determine the OEM software version: >...

  • Page 16

    MC75 User Guide Fusion Software To determine the Fusion software version: icon > > Signal Strength Wireless Status Versions Signal Strength icon Phone Software To determine the Phone software version: > > > > tab. Start Phone Menu Options Phone Info...

  • Page 17: Chapter Descriptions

    Topics covered in this guide are as follows: • Chapter 1, Getting Started provides information on getting the MC75 up and running for the first time. • Chapter 2, Using the MC75 provides basic instructions for using the MC75, including powering on and resetting the MC75, and entering and capturing data.

  • Page 18: Related Documents

    Software type and version number Motorola responds to calls by email, telephone or fax within the time limits set forth in support agreements. If your problem cannot be solved by Motorola Enterprise Mobility Support, you may need to return your equipment for servicing and will be given specific directions.

  • Page 19

    About This Guide xvii If you purchased your Enterprise Mobility business product from a Motorola business partner, contact that business partner for support.

  • Page 20

    MC75 User Guide...

  • Page 21: Introduction

    Chapter 1 Getting Started Introduction This chapter lists the parts and accessories for the MC75 and explains how to install and charge the batteries, replace the strap, and power on the MC75 for the first time. Charging/Battery Radio Scan/Decode Status LED...

  • Page 22

    Shown) Stylus Tether Point MC75 Rear View Figure 1-2 Unpacking Carefully remove all protective material from the MC75 and save the shipping container for later storage and shipping. Verify that you received the following: • MC75 EDA • 3600 mAh Lithium-ion battery •...

  • Page 23

    Charges up to four MC75 devices. Cradle VCD7000 Vehicle Cradle VCD7X00-P000R Installs in a vehicle and charges the MC75 main battery and a spare battery. Provides serial data communication between an MC75 and an external device. Chargers Four Slot Battery Charger SAC7X00-4000CR Charges up to four MC75 spare batteries.

  • Page 24: Installing The Sim Card

    NOTE MC7506 and MC7596 configurations only. GSM phone service requires a Subscriber Identification Module (SIM) card, or smart card. Obtain this card from the your service provider. The card fits into the MC75 and can contain the following information: •...

  • Page 25

    Press the red Power button to suspend the MC75. Perform a warm boot. See Resetting the MC75 on page 2-14. Make a call to verify cellular connection. NOTE For detailed information about WWAN activation and settings, refer to the MC75 Integrator Guide.

  • Page 26: Installing The Main Battery

    MC75 User Guide Installing the Main Battery NOTE The MC75 ships with a 3600 mAh battery. An optional 4800 mAh battery is available. To install the main battery: Insert the battery, top first, into the battery compartment in the back of the MC75.

  • Page 27: Charging The Battery

    The MC75 is equipped with a memory backup battery which automatically charges from the fully-charged main battery. When using the MC75 for the first time, the backup battery requires approximately 36 hours to fully charge. This is also true any time the backup battery is discharged, which occurs when the main battery is removed for several hours.

  • Page 28: Charging Spare Batteries

    LED. See Table 1-2. Powering On the MC75 Press the Power button to turn on the MC75. If the MC75 does not power on perform a warm boot. See Resetting the MC75 on page 2-14.

  • Page 29

    1 - 9 Micro Secure Digital (microSD) Card The microSD card slot provides secondary non-volatile storage. The slot is located on the side of the MC75 (see Figure 1-7). Refer to the documentation provided with the card for more information, and follow the manufacturer’s recommendations for use.

  • Page 30: Adjusting The Handstrap

    1 - 10 MC75 User Guide Adjusting the Handstrap The MC75 handstrap is attached to the bottom of the battery cover. Adjust the handstrap to increase comfort when holding the MC75 for extended periods of time. To adjust the handstrap: Feed the handstrap through the handstrap slot in either direction, to tighten or loosen.

  • Page 31: Replacing The Main Battery

    Press the battery release latch on the bottom of the battery to unlock, and lift the battery out of the well. Insert the replacement battery, top first, into the battery compartment in the back of the MC75. Press the battery down into the battery compartment until the battery release latch snaps into place.

  • Page 32: Changing The Power Settings

    1 - 12 MC75 User Guide Battery Management Observe the following battery saving tips: NOTE The MC75 factory default settings for the WWAN and WLAN radios are set to ON. • Leave the MC75 connected to AC power at all times when not in use.

  • Page 33: Turning Off The Radios

    Getting Started 1 - 13 Turning Off the Radios Windows Mobile 6 devices include , which provides a simple method of enabling, disabling, and Wireless Manager configuring all the device’s wireless capabilities in one place. To open , tap the icon or tap on the screen.

  • Page 34

    1 - 14 MC75 User Guide Wireless Manager Menu Figure 1-14...

  • Page 35: Chapter 2 Using The Mc75

    Chapter 2 Using the MC75 Introduction This chapter explains the buttons, status icons, and controls on the MC75, and provides basic instructions for using the MC75, including powering on and resetting the MC75, and entering and capturing data. The MC75 factory default radio states are: •...

  • Page 36: Status Icons

    2 - 2 MC75 User Guide To customize the Today screen, tap Start > Settings > Today icon. Use the Appearance tab to customize the background and the Items tab to change the list and order of items that appear on the screen.

  • Page 37

    Using the MC75 2 - 3 Status Icons (Continued) Table 2-1 Icon Function Description Call missed. Dialing while no SIM card is installed. Voice call in progress. Calls are forwarded. Call on hold. Speakerphone is on. Antenna/signal icon: wireless on/good signal.

  • Page 38: Programs

    Bluetooth radio is off. Bluetooth Connection Bluetooth radio is connected to another Bluetooth device. ActiveSync Active serial connection between the MC75 and the host computer. Programs Table 2-3 lists the default programs on the Start menu. Programs in the Start Menu...

  • Page 39

    Synchronize information between the MC75 and a host computer or the Exchange Server. AirBEAM Allows specially designed software packages to be transferred between a host server and the MC75. Refer to the MC75 Integrator Guide for more information. BTExplorer Manages Bluetooth connections.

  • Page 40

    View and manage pictures, animated GIFs, and video files. Rapid Deployment Facilitates software downloads from a Mobility Services Platform Console FTP server to the MC75. Refer to the MC75 Integrator Guide for more information. Remote Desktop Log onto Windows NT server type computers and use all of the programs that are available on that computer from the MC75.

  • Page 41: Settings

    Using the MC75 2 - 7 Settings Table 2-5 lists control applications pre installed on the MC75. Tap Start > Settings to open the Settings window. Settings in the Setting Window Table 2-5 Icon Name Description Personal Tab Buttons Assign a program to a button.

  • Page 42

    Set the appropriate GPS communication ports, if required. You may need to do this when there are programs on your device that access GPS data or you have connected a GPS receiver to the MC75. GPS Setup View GPS SUPL information.

  • Page 43

    Internet or a private local network. USB to PC Enables or disables the enhanced network connectivity. Wi-Fi Setup wireless network connection and customize settings. Wireless Manager Enables or disables the MC75’s wireless radios and customizes Wi-Fi, Bluetooth and Phone settings.

  • Page 44: Battery Status Indications

    2 - 10 MC75 User Guide Adjusting Volume To adjust the system volume using the Speaker icon in the navigation bar: Tap the Speaker icon. The Volume dialog box appears. Volume Dialog Box Figure 2-2 Tap and move the slide bar to adjust the volume.

  • Page 45: Battery Reserve Options

    Also view the battery status using the Power window. Battery Reserve Options If the charge of the battery reaches a critical threshold, the MC75 shuts down. This threshold can be changed but affects the amount of time that data can be retained.

  • Page 46: Main Battery Temperature Notifications

    • Level 3: Temperature Error; this level indicates the battery has reached an unusable temperature threshold and immediately suspends the MC75. This level does not have any graphical notification associated with it. Main Battery Temperature Watch Dialog Box Figure 2-7...

  • Page 47: Led Indicators

    Using the MC75 2 - 13 LED Indicators The MC75 has three LED indicators. The Scan/Decode LED indicates status for bar code scanning. The Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates WAN radio status.

  • Page 48: Performing A Warm Boot

    A cold boot also restarts the MC75, and also resets the clock. Data saved in flash memory or a memory card is not lost. If the MC75 is not functioning properly, perform a warm boot first. If the MC75 still does not respond, perform a cold boot.

  • Page 49: Locking The Mc75

    Using the MC75 2 - 15 Locking the MC75 Use the Device Lock feature to prevent use of the device. Note that when locked, the MC75 does not respond to screen or keypad input. To lock the device, tap the Device unlocked icon. The icon changes to locked.

  • Page 50: Numeric Keypad Configuration

    2 - 16 MC75 User Guide Keypads The MC75 offers two types modular keypad configurations: Numeric and alpha-numeric. Numeric Keypad Configuration The numeric keypad contains application keys, scroll keys, and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that an application can change keypad functions so the MC75’s keypad may not function exactly as described.

  • Page 51

    Using the MC75 2 - 17 MC75 Numeric Keypad Descriptions (Continued) Table 2-8 Description Talk/End Talk (Green Phone): press to display the phone keypad window or to dial a phone number (from the phone keypad window). End (Red Phone): press when the phone keypad window displays to stop dialing or end a call.

  • Page 52

    2 - 18 MC75 User Guide MC75 Numeric Keypad Descriptions (Continued) Table 2-8 Description SHIFT Press and release the SHIFT key to activate the keypad alternate SHIFT functions. A single press displays the following icon at the bottom of the screen, until a second key is...

  • Page 53: Alpha-numeric Keypad Configurations

    Using the MC75 2 - 19 Numeric Keypad Input Modes (Continued) Table 2-9 Orange Key Orange + Shift Keys Numeric Mode (Alpha Lowercase Mode) (Alpha Uppercase Mode) Blue+ SHIFT + Key Press Press Press Press Press Press Press Press Hilight...

  • Page 54

    2 - 20 MC75 User Guide QWERTZ Keypad Configuration Figure 2-15 Alpha-numeric Keypad Descriptions Table 2-10 Action Blue Key Launches applications (shown on the keypad in blue). Press the Blue key once to activate this mode temporarily, followed by another key. This...

  • Page 55

    Using the MC75 2 - 21 Alpha-numeric Keypad Descriptions (Continued) Table 2-10 Action Scroll Up and Left Moves up one item. Moves left one item when pressed with the Orange key. Scroll Down and Right Moves down one item. Moves right one item when pressed with the Orange key.

  • Page 56

    2 - 22 MC75 User Guide Alpha-numeric Keypad Descriptions (Continued) Table 2-10 Action Menu Use this key in conjunction with the Blue key to instantly display the context menu from any application without tapping the screen. This function is user programmable.

  • Page 57

    Using the MC75 2 - 23 QWERTY Keypad Input Modes (Continued) Table 2-11 Normal Shift + Key Orange + Key Blue + Key & < ENTER Enter Backlight Backlight Backlight Backlight Back tab SPACE Space Space Space Space Star >...

  • Page 58

    2 - 24 MC75 User Guide AZERTY Keypad Input Modes (Continued) Table 2-12 Normal Shift + Key Orange + Key Blue + Key ‘ Shift Shift & < Backspace backspace Enter Enter Backlight Backlight Backlight Backlight Back tab SPACE Space...

  • Page 59

    Using the MC75 2 - 25 QWERTZ Keypad Input Modes (Continued) Table 2-13 Normal Shift + Key Orange + Key Blue + Key “ áü ‘ Backspace Backspace Shift Shift & < ENTER Enter Backlight Backlight Backlight Backlight Back tab...

  • Page 60: Special Character Key

    NOTE Special characters are only available on the alpha-numeric keypad configurations. To add special characters using the MC75 áü key, type the related character first, then press the Orange twice followed by the áü (P) key. Continue pressing the áü key until the special character displays. To modify an existing character, move the cursor to the right of the character then press the Orange key twice and then press the áü...

  • Page 61: Function Buttons

    Function Buttons Figure 2-16 • Power: Press the red Power button to turn the MC75 screen on and off. The MC75 is in suspend mode when the screen is off. For more information, see Powering On the MC75 on page 1-8.

  • Page 62: Stylus

    NOTE Motorola recommends using the spring-loaded tip of the stylus to write on the screen, and the back end of the stylus to tap the screen. Use your finger to press the Power button and keypad buttons.

  • Page 63: Linear Scanning

    (either 1D or 2D). • Image Capture Mode: Use this mode to capture an image within the MC75’s field of view. This is useful for capturing signatures or images of items like damaged boxes.

  • Page 64: Digital Camera

    Hold the MC75 farther away for larger symbols. • Move the MC75 closer for symbols with bars that are close together. NOTE Scanning procedures depend on the application and MC75 configuration. An application may use different scanning procedures from the one listed above. Linear Scanning Ensure that a scan enabled application is loaded on the MC75.

  • Page 65: Imager Scanning

    Note that when the MC75 is in Pick List Mode, the imager does not decode the bar code until the...

  • Page 66: Digital Camera Scanning

    Figure 2-23 Release the scan button. NOTE Imager decoding usually occurs instantaneously. The MC75 repeats the steps required to take a digital picture (image) of a poor or difficult bar code as long as the scan button remains pressed. Digital Camera Scanning Ensure that a scan-enabled application is loaded on the MC75.

  • Page 67: Taking Photos

    Sample Scan Application with Preview Window Figure 2-24 Move the MC75 until the red aiming reticle is on the bar code to scan. The aiming reticle turns green when the MC75 is able to decode the bar code. Digital Camera Scanning Figure 2-25 Release the scan button.

  • Page 68: Viewing Photos And Videos

    2 - 34 MC75 User Guide Recording Video To record a video clip: Tap Start > Programs > Pictures & Videos icon. Tap Camera on the command bar. Tap Menu > Video to set shooting mode to video. The available recording time displays on the screen.

  • Page 69: Infrared Connection

    Switch to the program where you created the item you want to send and locate the item in the list. NOTE Do not cover or block the IrDA window. Align the IrDA port of the MC75 with that of the IrDA device so that they are unobstructed and within a close range.

  • Page 70

    Figure 2-28 To receive files via IrDA connection: Align the IrDA port of the MC75 with that of the other IrDA device so that they are unobstructed and within a close range. On the other device, send the file to the MC75.

  • Page 71: Chapter 3 Using Gps Navigation

    These radio signals contain data on the satellites’ locations and their exact clock time and are used to determine your location on the earth. When using the MC75 in a vehicle, it is the user’s responsibility to place, secure and use in a WARNING manner that will not cause accidents, personal injury or property damage or obstruct their view.

  • Page 72: Operation

    MC75 from receiving a GPS signal from satellites. To improve GPS signal strength, place the MC75 where there is a clear view of the sky. A direct line of sight is required between the MC75 and the GPS satellites to access information from the satellites.

  • Page 73

    GPS satellites. With the A-GPS data, GPS receivers can operate faster and more reliably. A-GPS follows the Secure User Plane Location (SUPL) protocol which allows the MC75 to communicate with a location server. Refer to the EMDK Help file for information on setting up SUPL on the MC75.

  • Page 74

    3 - 4 MC75 User Guide...

  • Page 75: Chapter 4 Using Bluetooth

    MC75s with Bluetooth capabilities can exchange information (e.g., files, appointments, and tasks) with other Bluetooth enabled devices such as phones, printers, access points, and other mobile computers. To use the MC75 as a modem, create a dial-up modem connection between a computer and MC75.

  • Page 76: Security

    MC75 User Guide The Bluetooth radio in this MC75 operates as a Class 2 device power class. The maximum output power is 2.5mW and the expected range is 32.8 feet (10 meters). A definition of ranges based on power class is difficult to obtain due to power and device differences, and whether one measures open space or closed office space.

  • Page 77: Disabling Bluetooth

    Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the radio is off, other Bluetooth devices cannot see or connect to the MC75. Turn on the Bluetooth radio to exchange information with other Bluetooth devices (within range).

  • Page 78: Bluetooth Power States

    Cold Boot Performing a cold boot on the MC75 turns off Bluetooth after initialization (which takes a few moments). It is normal to see the Bluetooth icon appear and disappear, as well as a wait cursor, when initialization proceeds in all modes.

  • Page 79

    Using Bluetooth 4 - 5 Explorer Mode Window Figure 4-3 You can also use the “tap and hold” technique to view available options. Scroll bars and view options are similar to those on the Windows desktop. The tree structure lists the following sub-items: •...

  • Page 80

    4 - 6 MC75 User Guide Discovering Bluetooth Device(s) The MC75 can receive information from discovered devices without bonding. However, once bonded, the MC75 and a bonded device exchange information automatically when you turn the Bluetooth radio on. See Bonding with Discovered Device(s) on page 4-20 for more information.

  • Page 81

    Discover Devices Dialog Box Figure 4-5 The discovered devices display in the Select Remote Device window. Select Remote Device Window Figure 4-6 Select a device from the list and tap Next. The MC75 searches for services on the selected Bluetooth device.

  • Page 82

    Device Services Figure 4-7 NOTE If the MC75 discovers a service but the service is not supported, the service icon is grayed-out. Select a service from the list and press Next. The Connection Favorite Options window appears. Connection Favorite Options Window Figure 4-8 In the Favorite Name text box, enter a name for this service that will appear in the Favorite window.

  • Page 83: Available Services

    To transfer files between the MC75 and another Bluetooth enabled device: Ensure the MC75 is discoverable and connectable. See Device Info Tab on page 4-23. Ensure that OBEX File Transfer profile is enabled on the MC75. See Profiles Tab on page 4-32 for more information.

  • Page 84: Creating A New File Or Folder

    • Delete - delete the selected file on the remote device. • Get File - copy the file from the remote device to the MC75. • Put File - copy a file from the MC75 to the remote device. Creating a New File or Folder To create a new folder or file on the remote device: Tap and hold on the screen and select New >...

  • Page 85: Deleting A File

    Double-tap or tap and hold on the file and select Get. The Save Remote File window appears. Navigate to the directory to save the file. Tap Save. The file is transferred from the remote device to the MC75. Copying a File To copy a file to a remote device: Tap Action >...

  • Page 86: Dial-up Networking Services

    4 - 12 MC75 User Guide Dial-Up Networking Services Dial-up networking allows the user to connect a PC or laptop to the MC75 and use the MC75 as a modem to connect to an office network or ISP. Before setting up dial-up networking, obtain dial-up information and other necessary settings (username, password and domain name, if required) for the office network or ISP.

  • Page 87: Sending A Contact

    Using Bluetooth 4 - 13 Ensure that the OBEX Object Push profile is enabled on the MC75. See Profiles Tab on page 4-32 for more information. NOTE If favorite connections have already been created, the Favorites screen displays. If no favorite connections have been created, the New Connection Wizard screen displays.

  • Page 88: Swapping Contacts

    4 - 14 MC75 User Guide Select Contact Entry Window Figure 4-14 Select a contact to send to the other device. Tap OK. Tap OK to send the contact to the other device and display a confirmation dialog box on the other device to accept the contact.

  • Page 89: Fetching A Contact

    Using Bluetooth 4 - 15 Select Contact Entry Window Figure 4-16 Select a contact to send to the other device. Tap OK. Tap OK to swap contacts with the other device and display a confirmation dialog box on the other device to accept the contact.

  • Page 90: Headset Services

    NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual for more information. Ensure the MC75 is discoverable and connectable. See Device Info Tab on page 4-23.

  • Page 91: Hands-free Services

    Select the Hands-free service name and select Connect. The MC75 connects to the headset. Refer to the headset user manual for instructions on communicating with a Bluetooth device. During an active connection, the MC75 cannot go into suspend mode when the Power Button is pressed. A message appears notifying the user.

  • Page 92: Serial Port Services

    Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the application that will use the connection to the correct serial port. To establish a serial port connection: Ensure the MC75 is discoverable and connectable. See Device Info Tab on page 4-23.

  • Page 93

    Figure 4-22 In the Service Type drop-down list, select Active Sync. Tap OK. The MC75 connects the PC and an ActiveSync session begins. Tap Finish. The Connection Favorite Options window appears. To end the session, tap the ActiveSync icon in the Favorite window and select Disconnect from the pop-up...

  • Page 94: Personal Area Network Services

    Bonding with Discovered Device(s) A bond is a relationship created between the MC75 and another Bluetooth device in order to exchange information in a secure manner. Creating a bond involves entering the same PIN on the two devices. After creating a bond and turning on the Bluetooth radios, the devices recognize the bond and can exchange information without re-entering a PIN.

  • Page 95

    Using Bluetooth 4 - 21 To bond with a discovered Bluetooth device: NOTE If favorite connections have already been created, the Favorites screen displays. If no favorite connections have been created, the New Connection Wizard screen displays. Tap the Bluetooth icon and select Show BTExplorer. The BTExplorer window appears. Tap Menu >...

  • Page 96: Deleting A Bonded Device

    A confirmation dialog appears. Tap Yes. Accepting a Bond When a remote device wants to bond with the MC75, enter a PIN when requested to grant permission. Ensure that the MC75 is set to discoverable and connectable. See Bluetooth Settings on page 4-23.

  • Page 97: Bluetooth Settings

    Using Bluetooth 4 - 23 Tap OK to create the bond. The MC75 can now exchange information with the other device. Bluetooth Settings Use the BTExplorer Settings window to configure the operation of the BTExplorer application. Tap Menu > Settings. The BTExplorer Settings window appears.

  • Page 98: Dial-up Networking Service

    4 - 24 MC75 User Guide To add a service: Tap Add. The Add Local Service window displays. Add Local Service Window Figure 4-29 In the list, select a service to add. Tap OK. The Edit Local Service window displays for the selected service.

  • Page 99: File Transfer Service

    Using Bluetooth 4 - 25 Table 4-1 Item Description Local COM Port Select the COM port. Local Baud Rate Select the communication baud rate. Local Port Options Select the port option. File Transfer Service File transfer allows other Bluetooth devices to browse files. BTExplorer Settings - File Transfer Information Figure 4-31 File Transfer Information Data...

  • Page 100: Hands-free Audio Gateway Service

    BTExplorer Settings - Headset Audio Gateway Figure 4-33 Headset Audio Gateway Data Table 4-4 Item Description Service Name Lists the name of the audio service. IrMC Synchronization Service The IrMC Synchronization service used to synchronize PIM contacts between a remote device and the MC75.

  • Page 101: Obex Object Push Service

    Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt. Phonebook Select the Phonebook checkbox to allow synchronization with the MC75’s contacts. Select Read, Write, Create and/or Delete to allow phonebook permissions. OBEX Object Push Service OBEX Object Push allows other Bluetooth devices to push contacts, business cards, pictures, appointments, and tasks to the MC75.

  • Page 102: Personal Area Networking Service

    Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt. Do not allow clients to push objects Disables clients from pushing objects to the MC75. Inbox Directory Select a directory where another Bluetooth device can store files.

  • Page 103: Serial Port Service

    Using Bluetooth 4 - 29 Personal Area Networking Data Table 4-7 Item Description Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt. Support Group Ad-Hoc Select to enable Ad-Hoc networking.

  • Page 104: Discovery Tab

    4 - 30 MC75 User Guide BTExplorer Settings - Security Tab Figure 4-38 Authenticate Authenticate/Encrypt NOTE To use PIN Code, select from the Service Security drop-down list on each local service. Security Tab Data Table 4-9 Item Description Use PIN Code (Incoming Select for automatic use of the PIN code entered in the PIN Code text box.

  • Page 105: Virtual Com Port Tab

    Table 4-10 Item Description Inquiry Length Sets the amount of time the MC75 takes to discover Bluetooth devices in the area. Name Discovery Mode Select either Automatic or Manual to automatically attempt to discover a Bluetooth device's name after finding the device.

  • Page 106: Hid Tab

    4 - 32 MC75 User Guide HID Tab Use the HID tab to select The Human Interface Device Profile programming interface defines the protocols and procedures to be used to implement HID capabilities. Provides support for devices such as mice, joysticks, keyboards.

  • Page 107: System Parameters Tab

    Link Supervision Timeout Sets the amount of time that the MC75 will wait for a device to come back into range after it has gone out of range. If the device does not come back into range by the set time, the MC75 drops the connection.

  • Page 108

    4 - 34 MC75 User Guide Miscellaneous tab Data Table 4-14 Item Description Highlight Connections Select the connection type to highlight when connected. In the Wizard Mode, the only options are Favorites or None. In the Explorer Mode the options are None, Tree View Only, List View Only, or Tree and List View.

  • Page 109: Chapter 5 Using The Phone

    Chapter 5 Using the Phone Introduction Use the MC75 to make phone calls, set up speed dials, keep track of calls, and send text messages. Your wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID.

  • Page 110: Turning The Phone On And Off

    To access the phone keypad tap Start > Phone or press the green phone key on the MC75’s keypad. To receive calls when the MC75 is suspended, leave the phone radio turned on and ensure the MC75 is set to wake with any key.

  • Page 111: Using A Wired Headset

    The MC75 offers three audio modes for use during phone calls: • Handset Mode: Switches audio to the speaker at the top front of the MC75, so you can use the MC75 as a handset. This is the default mode.

  • Page 112: Using A Bluetooth Headset

    Chapter 4, Using Bluetooth for more information. NOTE When using a Bluetooth headset during a call, the MC75 power button is disabled and the MC75 will not go into suspend mode. Once the call is completed, the power button functionality is enabled.

  • Page 113: Making A Call

    NOTE Adjust the conversation phone volume during a call. Adjusting the volume while not in a call affects the ring and notification sound levels. Making a Call NOTE You can make emergency calls even when the MC75 is locked or when a SIM card is not installed. See Making an Emergency Call on page 5-7 for more information.

  • Page 114: Using Call History

    Tap the phone icon next to the number to begin dialing and return to the phone keypad. Tap End or press the red phone key on the MC75 keypad to stop dialing or end the call. Making a Speed Dial Call Use Speed Dial to call someone saved in the speed dial directory.

  • Page 115: Making An Emergency Call

    Answering a Call A dialog box appears on the MC75 when it receives an incoming call. If the phone is set to ring, a ring tone sounds. Answer or ignore the incoming call. To answer an incoming call tap Answer on the Phone - Incoming dialog or press the green phone key on the...

  • Page 116: Incoming Call Features

    If you receive a call while in a call, tap Wait to place the call in call waiting. • You can use other programs on the MC75 during a call. To switch back to Phone, tap Talk or tap Start > Phone. Tap End to end the call.

  • Page 117: Muting A Call

    This is useful when there is conversation or background noise on your end. To mute or unmute a call: Tap Start > Phone or press the green phone key on the MC75’s keypad. Make a call.

  • Page 118: Taking Notes

    Windows On-Device Help. To access a note created during a call: Tap Start > Phone or press the green phone key on the MC75’s keypad. From the Phone keypad, tap Call History. Tap and hold the number or the Note icon for the phone call entry containing the note.

  • Page 119: Using Speed Dial

    To add a speed dial entry from the phone keypad: Ensure the contact and phone number are in the Contacts list. Tap Start > Phone or press the green phone key on the MC75’s keypad. Tap Menu > Speed Dial > Menu > New.

  • Page 120

    5 - 12 MC75 User Guide Speed Dial Contact Location Figure 5-16 In the Location field, tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail.

  • Page 121: Editing A Speed Dial Entry

    Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail. Tap ok. Editing a Speed Dial Entry Tap Start > Phone or press the green phone key on the MC75’s keypad. Tap Menu > Speed Dial.

  • Page 122: Deleting A Speed Dial Entry

    Contacts > Deleting a Speed Dial Entry Tap Start > Phone or press the green phone key on the MC75’s keypad. Tap Menu > Speed Dial. Tap and hold the contact name. Speed Dial Delete Menu Figure 5-21 Tap Delete.

  • Page 123: Using Call History

    Change views, reset the call timer, and delete calls to manage the calls stored in Call History. Changing the Call History View Tap Start > Phone or press the green phone key on the MC75’s keypad to display the Phone keypad. From the Phone keypad, tap Call History.

  • Page 124: Deleting Call History Items By Call Date

    Tap ok to exit the Call Timers window. Deleting Call History Items by Call Date Tap Start > Phone or press the green phone key on the MC75’s keypad to display the Phone keypad. From the Phone keypad, tap Call History.

  • Page 125: Deleting All Call History Items

    Tap ok to exit the Call Timers window. Deleting All Call History Items Tap Start > Phone or press the green phone key on the MC75’s keypad to display the Phone keypad. From the Phone keypad, tap Call History. Tap Menu.

  • Page 126: Viewing Call Status

    5 - 18 MC75 User Guide Viewing Call Status Tap Start > Phone or press the green phone key on the MC75’s keypad to display the Phone keypad. From the Phone keypad, tap Call History. Tap an entry. The Call Status window appears.

  • Page 127: Swapping Calls On An Mc7506/96

    To move between two or more phone calls: Tap Start > Phone or press the green phone key on the MC75’s keypad to display the Phone keypad. Enter the first phone number and press Talk. When the call connects, Hold appears on the keypad.

  • Page 128: Swapping Calls On An Mc7508/98

    Call Swapping Figure 5-33 Tap End or press the red phone key on the MC75 keypad to end active call. The remaining call re-connects, tap Answer to connect to the call. Tap End or press the red phone key on the MC75 keypad to end the last call.

  • Page 129

    After the call is answered, tap Menu > Conference to place all the calls in conference mode. Repeat steps 6 through 8 for up to six phone numbers. Tap End or press the red phone key on the MC75 keypad to end the conference call. Menu...

  • Page 130: Three-way Calling On An Mc7508/98

    To create a three-way phone session with two people and you as the initiator: Tap Start > Phone or press the green phone key on the MC75’s keypad to display the Phone keypad. Enter the first phone number and press Talk.

  • Page 131: Text Messaging

    160 characters. Short text messages delivered over mobile networks transmit from the sending MC75, are stored in a central short message center, then forwarded to the destination mobile device. If the recipient is not available, the message is stored and can be sent later.

  • Page 132: Sending A Text Message

    5 - 24 MC75 User Guide Tap Text Messages. Text Messaging on Today Screen Figure 5-40 The Messaging window appears. Messaging Window Figure 5-41 In the message list, tap a Text Messages. Tap to reply the message. Text Messages List...

  • Page 133

    Using the Phone 5 - 25 Tap Menu > Send Text Message. Phone Screen Contact List Figure 5-43 Compose your message. Address Area Message Area Create Text Message Figure 5-44 • The auto-correct feature automatically fixes common spelling errors as you type so your messages are more accurate.

  • Page 134: Using A Dual Line Sim

    5 - 26 MC75 User Guide If the phone is turned on, your text message is sent. If it’s off, you are prompted to turn on the phone. If you do so, the message is sent; otherwise when you tap ok, the message is saved in the Drafts folder and sent when the phone is turned on.

  • Page 135

    Using the Phone 5 - 27 Select Change and then tap Select. If applicable, sign in with the PIN number for the other line.

  • Page 136

    5 - 28 MC75 User Guide...

  • Page 137: Chapter 6 Accessories

    USB connection. • Vehicle Cradle - Provides secure mounting of the MC75 in a vehicle. Charges the MC75 and a spare battery. Provides a serial port for data communication between an MC75 and an external device.

  • Page 138: Single Slot Usb/serial Cradle

    6 - 2 MC75 User Guide Single Slot USB/Serial Cradle This section describes how to use a Single Slot USB/Serial cradle with the MC75. For USB communication setup procedures refer to the MC75 Integrator Guide. The Single Slot USB/Serial Cradle: •...

  • Page 139: Charging The Spare Battery

    Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the MC75. To accomplish this, for small periods of time, the MC75 or accessory alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC75 or accessory indicates when charging is disabled due to abnormal temperatures via its LED.

  • Page 140: Four Slot Ethernet Cradle

    MC75 User Guide Four Slot Ethernet Cradle This section describes how to set up and use a Four Slot Ethernet cradle with the MC75. For cradle communication setup procedures refer to the MC75 Integrator Guide. The Four Slot Ethernet cradle: •...

  • Page 141: Charging

    Accessories 6 - 5 Four Slot Charge Only Cradle This section describes how to set up and use a Four Slot Charge Only cradle with the MC75. The Four Slot Charge Only cradle: • Provides 5.4 VDC power for operating the MC75.

  • Page 142: Charging The Mc75 Battery

    Motorola is not responsible for any loss resulting from the use of the products while driving. Removing the MC75 To remove the MC75, hold back the release lever on the cradle and pull the MC75 up and out of the cradle.

  • Page 143: Charging The Spare Battery

    Accessories 6 - 7 Release Lever Removing the MC75 Figure 6-6 Charging the Spare Battery Insert a spare battery to begin charging: Lift the battery release lever. Battery Release Lever Battery Inserting the Spare Battery Figure 6-7 Insert the spare battery in the spare battery charging slot in the cradle with the charging contacts facing up and to the rear of the cradle.

  • Page 144: Battery Charging Indicators

    Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the MC75. To accomplish this, for small periods of time, the MC75 or accessory alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC75 or accessory indicates when charging is disabled due to abnormal temperatures via its LED.

  • Page 145: Mc75 Battery Shim Installation

    6 - 9 Four Slot Battery Charger This section describes how to use the Four Slot Battery Charger to charge up to four MC75 batteries. MC75 Battery Shim Installation Before charging a spare battery, snap the MC75 shim into the battery slot as shown in Figure 6-9.

  • Page 146: Battery Charging Indicators

    6 - 10 MC75 User Guide Spare Battery Spare Battery Charging LEDs (4) Four Slot Battery Charger Figure 6-10 Battery Charging Indicators The charger has an amber LED for each battery charging well. See Table 6-3 for charging status indications. The 3600 mAh battery fully charges in less than five hours and the 4800 mAh battery fully charges in less than seven hours.

  • Page 147: Attaching And Removing The Msr

    When attached to the MC75, the MSR allows the MC75 to capture data from magnetic stripe cards. To download MSR data capture software, visit the Motorola web site at http://www.symbol.com/support. With the MSR attach, the MC75 can still be charged by placing the MC75 with MSR into a cradle or connecting to a charging cable.

  • Page 148

    6 - 12 MC75 User Guide Magnetic Stripe Card Swiping Figure 6-12 The application indicates if the data has been read correctly.

  • Page 149: Getting Started

    DCR Installation Figure 6-13 Pull on the DCR to ensure it is securely connected to the MC75. Removal To remove the DCR from the MC75, push in the bottom of the two locking tabs and pull the DCR from the MC75.

  • Page 150: Credit Card Transactions

    Figure 6-14 Credit Card Transactions Launch a transaction application on the MC75. In the application, select Credit Card transaction. Swipe the credit card through the magnetic stripe reader (MSR) slot, orienting the magnetic stripe as shown. Data encoded on the credit card is captured and, depending on the application, may display in an application data field.

  • Page 151: Keypad

    NOTE Swipe the card in either direction, from left to right, or right to left. For best results, gently press down on the card while swiping to ensure contact with the bottom of the slot. Turn the MC75 over and present the DCR keypad to the customer. The customer enters their PIN following the instructions on the DCR display.

  • Page 152: Display Messages

    When the DCR is not used for extended periods of time or in storage it must be charged periodically to maintain the battery charge. Motorola recommends charging the DCR once every three months. If the DCR battery fully discharges the debit function will be inoperable but the MSR will still function for credit card transactions.

  • Page 153

    DCR for approximately three hours. BATT LOW To charge the DCR, place it in a cradle or connect it to a charging cable. The DCR also charges when connected to the MC75 and the transaction application is running. Charging the DCR Figure 6-19...

  • Page 154

    Use the headset to communicate via Voice-Over-IP (VOIP) or for audio playback and telephony applications. To connect the headset, remove the plug from the headset jack at the top of the MC75 and insert the headset connector. Contact a Motorola representative for compatible headsets.

  • Page 155: Battery Charging And Operating Power

    Figure 6-21 Communication/charge cables: • Provide the MC75 with operating and charging power when used with the Motorola approved power supply. • Synchronize information between the MC75 and a host computer. With customized or third party software, it can also synchronize the MC75 with corporate databases.

  • Page 156: Led Charge Indications

    6 - 20 MC75 User Guide Slide the bottom of the MC75 into the connector end of the communication/charge cable and gently press in until it latches into the MC75. The MC75 amber Charge LED indicates the MC75 battery charging status. The 3600 mAh standard battery charges in less than five hours and the 4800 mAh standard battery charges in less than seven hours.

  • Page 157: Chapter 7 Maintenance & Troubleshooting

    Do not store or use the MC75 in any location that is dusty, damp, or wet. • Use a soft lens cloth to clean the MC75. If the surface of the MC75 screen becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution.

  • Page 158: Battery Safety Guidelines

    MC75 User Guide • A screen protector is applied to the MC75. Motorola recommends using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. Benefits include: • Protection from scratches and gouges •...

  • Page 159: Cleaning

    Always wear eye protection. Read warning label on compressed air and alcohol product before using. If you have to use any other solution for medical reasons please contact Motorola for more information. WARNING Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug the device and clean the product immediately in accordance with these guidelines.

  • Page 160: Cleaning Cradle Connectors

    7 - 4 MC75 User Guide Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface. CAUTION: Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.

  • Page 161: Troubleshooting

    Install the battery properly. See Installing the Main Battery on page not installed 1-6. properly. System crash. Perform a warm boot. If the MC75 still does not turn on, perform a cold boot. See Resetting the MC75 on page 2-14. Rechargeable Battery failed.

  • Page 162

    MC75 shuts off. MC75 is inactive. The MC75 turns off after a period of inactivity. If the MC75 is running on battery power, set this period from 1 to 5 minutes, in one-minute intervals. If the MC75 is running on external power, set this period to 1, 2, 5, 10, 15, or 30 minutes.

  • Page 163: Bluetooth Connection

    Program the MC75 to accept the type of bar code being scanned. programmed for the bar code. MC75 is not If the MC75 does not beep on a good decode, set the application to programmed to generate a beep on good decode. generate a beep.

  • Page 164: Single Slot Usb/serial Cradle

    AC power. battery is inserted. MC75 is not seated Remove and re-insert the MC75 into the cradle, ensuring it is firmly firmly in the cradle. seated. Spare battery is not Remove and re-insert the spare battery into the charging slot, seated firmly in the ensuring it is firmly seated.

  • Page 165

    Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery. The MC75 is not Remove and re-insert the MC75 into the cradle, ensuring it is firmly fully seated in the seated. cradle. Ambient...

  • Page 166: Four Slot Ethernet Cradle

    Table 7-4 Symptom Cause Solution Attempt by the MC75 MC75 removed Wait one minute and reinsert the MC75 in the cradle. This allows to ActiveSync failed. from the cradle the cradle to attempt another synchronization. while the LED was blinking green.

  • Page 167: Vehicle Cradle

    Troubleshooting the Four Slot Ethernet Cradle (Continued) Table 7-4 Symptom Cause Solution Battery is not MC75 removed Replace the MC75 in the cradle. The 3600 mAh battery fully charging. from the cradle too charges in less than six hours. Tap > > >...

  • Page 168: Four Slot Battery Charger

    Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery. The MC75 is not Detach and re-attach the power cable to the MC75, ensuring it is fully attached to firmly connected. power. During data Cable was Re-attach the cable and retransmit.

  • Page 169: Magnetic Stripe Reader

    AC power too soon. Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty battery. The MC75 is not Detach and re-attach the MSR to the MC75, ensuring it is firmly fully attached to the connected. MSR. During data MC75 detached Reattach MC75 to MSR and retransmit.

  • Page 170

    7 - 14 MC75 User Guide...

  • Page 171: Appendix A Technical Specifications

    Appendix A Technical Specifications MC75 Technical Specifications The following tables summarize the MC75’s intended operating environment and technical hardware specifications. MC75 MC75 Technical Specifications Table A-1 Item Description Physical Characteristics Dimensions Length: 17.9 cm (7.05 in.) Width: 8.4 cm (3.30 in.) Depth: 4.4 cm (1.70 in.)

  • Page 172

    A - 2 MC75 User Guide MC75 Technical Specifications (Continued) Table A-1 Item Description Notification Vibrator and LED Keypad Options 26 key numeric 44 key QWERTY, 44 key AZERTY, 44 key QWERTZ Audio Speaker, receiver, microphone, headset jack, software support for full duplex...

  • Page 173

    Technical Specifications A - 3 MC75 Technical Specifications (Continued) Table A-1 Item Description Operating Channels Chan 8-169 (5040 – 5845 MHz) Chan 1-13 (2412-2472 MHz) Chan 14 (2484 MHz) Japan only Actual operating frequencies depend on regulatory rules and certification...

  • Page 174

    A - 4 MC75 User Guide MC75 Technical Specifications (Continued) Table A-1 Item Description Pitch Angle +/- 60° from normal Skew Tolerance +/- 50° from normal Ambient Light Total darkness to 9,000 ft. candles (96,900 Lux) Shock 2,000 +/- 5% G...

  • Page 175

    Technical Specifications A - 5 Data Capture Options (Continued) Table A-2 Item Description Imaging Decode Capability Code 39 Code 128 Code 93 Codabar Code 11 Interleaved 2 of 5 Discrete 2 of 5 EAN-8 EAN-13 UPCA UPCE UPC/EAN supplementals Coupon Code Trioptic 39 Webcode TLC39...

  • Page 176: Single Slot Usb/serial Cradle

    A - 6 MC75 User Guide MC75 Accessory Specifications Single Slot USB/Serial Cradle Single Slot USB/Serial Cradle Technical Specifications Table A-3 Feature Description Dimensions Length: 14.54 cm (5.72 in.) Width: 11.05 cm (4.35 in.) Height: 9.10 cm (3.58 in.) Weight 196 g (6.9 oz)

  • Page 177: Four Slot Charge Only Cradle

    Technical Specifications A - 7 Four Slot Ethernet Cradle Technical Specifications (Continued) Table A-4 Feature Description Charging Temperature 0°C to 40°C (32°F to 104°F) Humidity 5% to 95% non-condensing Drop 76.2 cm (30.0 in.) drops to vinyl tiled concrete at room temperature Electrostatic Discharge (ESD) +/- 15 kV air +/- 8 kV contact...

  • Page 178: Magnetic Stripe Reader

    A - 8 MC75 User Guide Four Slot Battery Charger Technical Specifications (Continued) Table A-6 Feature Description Power Consumption 30 watts Operating Temperature 0°C to 50°C (32°F to 122°F) Storage Temperature -40°C to 70°C (-40°F to 158°F) Charging Temperature 0°C to 40°C (32°F to 104°F)

  • Page 179: Appendix B Voice Quality Manager

    Introduction The Voice Quality Manager (VQM) is a software package that resides on the MC75. VQM enables a set of features for Voice over WiFi (VoWiFi) calls, and a sub-set of those features for cellular line (GSM or CDMA) calls. The VQM user interface is designed to be intuitive and easy to use, so complex tasks such as enabling the Acoustic Echo Canceller (AEC) while a call is in progress are done with very little or no user intervention.

  • Page 180: Audio Modes

    B - 2 MC75 User Guide Audio Modes The MC75 can be in any one of the seven different audio modes. The mode is visually indicated by the VQM icon on the title bar. VQM icon VQM Icon in Title Bar...

  • Page 181

    Voice Quality Manager B - 3 The table below lists the current audio mode and the subsequent audio mode after tapping the VQM icon. Changing Audio Modes Table B-2 Audio Mode before Tapping VQM Icon Audio Mode after Tapping VQM Icon Speakerphone Handset Handset...

  • Page 182: Voice Packet Prioritization

    B - 4 MC75 User Guide Voice Packet Prioritization IP soft phones transmit voice packets in the same manner as any other application that sends data over the network. On a network with different types of traffic, voice packets are given the same priority as any other traffic, and therefore may be subject to delays.

  • Page 183: Glossary

    Glossary API. An interface by means of which one software component communicates with or controls another. Usually used to refer to services provided by one software component to another, usually via software interrupts or function calls Aperture. The opening in an optical system defined by a lens or baffle that establishes the field of view. Application Programming Interface.

  • Page 184

    Glossary - 2 MC75 User Guide Bar Width. Thickness of a bar measured from the edge closest to the symbol start character to the trailing edge of the same bar. BIOS. Basic Input Output System. A collection of ROM-based code with a standard API used to interface with standard PC hardware.

  • Page 185

    Glossary - 3 Codabar. A discrete self-checking code with a character set consisting of digits 0 to 9 and six additional characters: (“-”, “$”, “:”, “/”, “,” and “+”). Code 128. A high density symbology which allows the controller to encode all 128 ASCII characters without adding extra symbol elements.

  • Page 186

    Glossary - 4 MC75 User Guide Device Configuration Package. The Symbol Device Configuration Package provides the Product Reference Guide (PRG), flash partitions, Terminal Configuration Manager (TCM) and the associated TCM scripts. With this package hex images that represent flash partitions can be created and downloaded to the mobile computer.

  • Page 187

    Glossary - 5 Hard Reset. See Cold Boot. Hz. Hertz; A unit of frequency equal to one cycle per second. Host Computer. A computer that serves other terminals in a network, providing such services as computation, database access, supervisory programs and network control. High-Speed Downlink Packet Access (HSDPA).

  • Page 188

    Glossary - 6 MC75 User Guide accepts “packets” from the layer 4 transport protocol (TCP or UDP), adds its own header to it and delivers a “datagram” to the layer 2 data link protocol. It may also break the packet into fragments to support the maximum transmission unit (MTU) of the network.

  • Page 189

    Mobile Computer. In this text, mobile computer refers to the MC75. It can be set up to run as a stand-alone device, or it can be set up to communicate with a network, using wireless radio technology.

  • Page 190

    Glossary - 8 MC75 User Guide PC Card. A plug-in expansion card for laptop computers and other devices, also called a PCMCIA card. PC Cards are 85.6mm long x 54 mm wide, and have a 68 pin connector. There are several different kinds: Type I;...

  • Page 191

    Glossary - 9 RS-232. An Electronic Industries Association (EIA) standard that defines the connector, connector pins, and signals used to transfer data serially from one device to another. Scan Area. Area intended to contain a symbol. Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol.

  • Page 192

    Glossary - 10 MC75 User Guide Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop characters, quiet zones, data characters and check characters. Symbol Aspect Ratio. The ratio of symbol height to symbol width.

  • Page 193

    Glossary - 11 UDP. User Datagram Protocol. A protocol within the IP protocol suite that is used in place of TCP when a reliable delivery is not required. For example, UDP is used for real-time audio and video traffic where lost packets are simply ignored, because there is no time to retransmit.

  • Page 194

    Glossary - 12 MC75 User Guide...

  • Page 195

    Index Numerics stylus ....... . . 1-4 USB charge cable ......1-3 1-D bar codes .

  • Page 196

    Index - 2 MC75 User Guide charging indicators ..... . 6-10 calculator ........2-5 battery chargers calendar .

  • Page 197

    ....1-4, 5-3, 5-4, 6-1, 6-18 locking MC75 ......2-15 headset mode .

  • Page 198

    Index - 4 MC75 User Guide calling ......5-6 deleting entry ..... . . 5-14 magnetic stripe reader .

  • Page 199

    Index - 5 certificates ......2-7 suspend ......1-11, 2-27, 4-4 connections .

  • Page 200

    Index - 6 MC75 User Guide WPAN Bluetooth ......xii Zebra printer cable ......6-19...

  • Page 202

    1-800-927-9626 http://www.motorola.com/enterprisemobility MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © Motorola, Inc. 2008...

Comments to this Manuals

Symbols: 0
Latest comments: