Resetting Paper Handling Setup Values
Resetting the Paper Handling Setup values resets the default paper source, 2-sided
printing, tray setup (default paper type/size), Load Paper Timeout, tray sequence, tray
prompt, custom size paper units, default paper destination, job offset, output tray
switch, fuser temperature configuration, and reprint jammed pages settings.
1.
From the Main Menu, select
button.
2.
Reset Paper Handling
Select
3.
Select
Reset Paper Handling Setup
Resetting PostScript Setup Values
Resetting the PostScript Setup values resets the PostScript Error Info, Image
Smoothing, and Edge-to-Edge Printing settings.
1.
From the Main Menu, select
2.
Reset PostScript
Select
3.
Select
Reset PostScript Setup
Resetting PCL Setup Values
Resetting the PCL Setup values resets the default font number, pitch, point size,
symbol set, orientation, form length, line termination character, and Edge-to-Edge
Printing settings.
1.
From the Main Menu, select
2.
Reset PCL
Select
3.
Select
Reset PCL Setup
Resetting General Setup Values
Resetting the General Setup values resets the Print-Quality Mode, Print Quantity, and
Print with Low Toner settings.
1.
From the Main Menu, select
2.
Reset General
Select
3.
Select
Reset General Setup
6-12
Paper Handling
Setup, then press the OK button.
PostScript
Setup, then press the OK button.
NOW, then press the OK button.
PCL
Setup, then press the OK button.
Setup, then press the OK button.
NOW, then press the OK button.
General
Setup, then press the OK button.
NOW, then press the OK button.
Setup, then press the OK
NOW, then press the OK button.
Setup, then press the OK button.
Setup, then press the OK button.
Phaser 4500 Service Manual