Replacement Note - Xerox Phaser 4500 Service Manual

Hide thumbs Also See for Phaser 4500:

Table of Contents

Pull the Paper Cassette from the printer.

To remove just the Retard Roller, perform step 2. To remove the Retard

Holder, perform steps 3 and 4. Avoid touching the rubber surfaces on the

new roller as much as possible to avoid contamination.

Press down on the Retard Holder, then release the hook retaining the Retard

Roller and slide it off the shaft.

Release the hooks that secure the Retard Holder to the Paper Cassette using a

screwdriver or similar tool.

Lift up the Retard Holder in the direction of the arrow as shown in the figure on

Replacement Note:

While installing the Retard Holder, ensure that both ends of the coil spring

under the holder are properly engaged with two boss pins. Check that it

springs back to its normal position when depressed and released.

Phaser 4500 Service Manual