Install Or Reseat Print Cartridge - Xerox Phaser 4500 Service Manual

Install or Reseat Print Cartridge

Error Indication
Install or Reseat Print Cartridge
Troubleshooting Reference
Applicable Parts
HVPS/Engine Logic Board
Print Cartridge
Print Cartridge Right Guide
Assembly
Troubleshooting Procedure
Steps Actions and Questions
1 Remove the Print Cartridge to check the
model.
Is the Print Cartridge the correct
model?
2 Re-install the Print Cartridge.
Does the error reoccur when the power
is turned ON?
3 1. Remove the Print Cartridge Right Guide
Assembly (page 8-58).
2. Test the wiring harnesses for continuity.
Is each harness continuous?
4 Replace the Print Cartridge.
Does the error occur again when the
power is turned ON?
Error Messages and Codes
Wiring and Plug/Jack Map References
"Print Cartridge, Transfer Roller Assembly" on
page 10-21
"Print Engine General Wiring Diagram" on
page 10-17
"Print Engine Plug/Jack Locator" on page 10-3
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Replace the
HVPS/Engine
Logic Board
(page 8-89).
No
Replace the Print
Cartridge.
Problem solved.
Replace the Print
Cartridge Right
Guide Assembly
(page 8-58).
Problem solved.
3-59