Paper Size Jam - Xerox Phaser 4500 Service Manual

Paper Size Jam

Error Code
PSE-1: Paper size jam
Troubleshooting Reference
Applicable Parts
150-Sheet Feeder Assembly
150-Sheet Paper Cassette
Registration Sensor
Registration Actuator
(Actuator B)
HVPS/Engine Logic Board
Left Tray Guide
550-Sheet Feeder Assembly
550-Sheet Paper Cassette
Note
This procedure assumes that optional 550-Sheet Paper Feeders are installed as
Tray 3 and Tray 4.
Troubleshooting Procedure
Steps Actions and Questions
1 Check the paper size setup.
Does the size displayed match the size
of the paper in use in the tray?
2 Check the Registration Sensor:
1. Enter Service Diagnostics, and from the
Sensor Tests
Registration Sensor
2. Manually actuate the Registration
Sensor Actuator.
Does the sensor operate correctly?
3 Check the paper feeding tray.
Is the paper supplied from either Tray 1
or Tray 2 when the error occurs?
4 Check the Paper Cassette (1).
Are these End Guide Assembly, Sector
Gear, Size Rack, Size Switch Links 1/2/3
of the Paper Cassette in Tray 1 or Tray 2
installed correctly?
3-54
Wiring and Plug/Jack Map References
"150-Sheet Feeder, 550-Sheet Feeder, Main Fan"
on page 10-22
"Print Engine General Wiring Diagram" on
page 10-17
"Print Engine Plug/Jack Locator" on page 10-3
menu select the
test.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to "Left Tray
Guide" on
page 4-34.
Phaser 4500 Service Manual
No
Go to step 3.
Go to
"Registration
Sensor" on
page 4-18.
Go to step 5.
Replace the
paper cassette.